Transportation, Storage And Disposal; Technical Data - RedMax TRZ230S Operator's Manual

Transportation and storage
• Store and transport the product and fuel so that
there is no risk that any leakage or fumes comes in
contact with sparks or open flames, for example,
from electrical machinery, electric motors, electrical
relays/switches or boilers.
• When you store and transport fuel always use
approved containers intended for this purpose.
• When you store the product for long periods the fuel
tank must be emptied. Contact your local petrol
station to find out where to dispose excess fuel.
Drain the tank into the appropriate containers and in
a well ventilated area.
• Ensure that the product is cleaned and that a
complete service is carried out before long-term
storage.
• The transport guard must always be fitted to the
cutting attachment when the product is transported
or in storage.
Engine
Cylinder displacement, cu.in/cm
Idle speed, rpm
Recommended max. speed, rpm
Max. engine output, according to ISO 8893, kW/hp @
rpm
Catalytic converter muffler
Speed of output shaft, rpm
Ignition system
Spark plug
Electrode gap, in/mm
Fuel and lubrication system
Fuel tank capacity, US pint/l
Weight
Weight, lbs/kg
1559 - 003 - 01.10.2020

Transportation, storage and disposal

Technical data

3
• Secure the product during transport.
• In order to prevent unintentional start of the engine,
the spark plug cap must always be removed during
long-term storage if the product is not under close
supervision and when you perform all service
measures.
• Allow the product to cool before you put in storage.
Disposal
• Obey the local requirements and applicable
regulations.
• Discard all chemicals, for example engine oil or fuel,
at a service center or at an applicable disposal
location.
• Discard the product at an approved disposal location
or send it to RedMax for disposal.
1.4/22.5
3000
9000
0.75/1.0 @ 8500
Yes
6500
NGK BPMR8Y
0.026/0.65
1.35/0.64
9.8/4.4
15