What Is Distance | Resistance | Interference; Can I Change Batteries In My Sensors Without Losing Data; Factory Reset: How Do I Factory Reset My Station - La Crosse Technology S77925 Faqs

• After 15 minutes move the sensor into the next room with a wall between the sensor and the
station for 1 hour.
• If there is no loss of signal in that hour, move the sensor just outside.
• Continue moving the sensor back to its original location.
• If you lose connection, look for sources of

WHAT IS DISTANCE | RESISTANCE | INTERFERENCE?

Distance:
• The maximum transmitting range in open air is over 330 feet (100 meters) between each
sensor and your station.
• Consider the signal path from your station to each sensor as a straight line.
• Consider the distance the station is from other electronics in the home.
Resistance:
• Each obstacle: walls, windows, vegetation, stucco, concrete, and large metal objects will
reduce the effective signal range by about one-half.
• Mounting your sensors on a metal fence can significantly reduce the effective signal range.
Interference:
• Consider electronics in the signal path between the sensors and your station.
• Simple relocation of the sensors or the station may correct an interference issue.
• Windows can reflect the radio signal.
• Metal will absorb the RF (radio frequency) signal.
• Stucco held to the wall by a metal mesh will cause interference.
• Transmitting antennas from: ham radios, emergency dispatch centers, airports, military
bases, etc. may cause interference.
• Electrical wires, utilities, cables, etc. may create interference if too close.

CAN I CHANGE BATTERIES IN MY SENSORS WITHOUT LOSING DATA?

We designed this station for convenience, so that a simple change of batteries does not lose
data or require you to power down your station.
• When Battery Indicator shows in the Outdoor Sensor area, replace batteries in your Outdoor
Sensor.
• Then hold the +/OUT button for 3 seconds and your station will search for your sensor.
• When changing the batteries in the color station, continue using the power cord. After
replacing the batteries, no other action is needed. The batteries in the station only maintain
time/date in the event of a power outage.

FACTORY RESET: HOW DO I FACTORY RESET MY STATION?

To factory reset your station:
1. Hold the ALERTS and RAIN buttons together for 5 seconds.
2. When your station resets it will look for all sensors. Allow at least ten minutes to reacquire
the sensors.
interference.
10 | P a g e