Sharp KI-L80 Operation Manual page 15

HUMIDIFYING FILTER / HUMIDIFYING TRAY
1. Remo e the
Humidi ing
Filter and Tra .
2. Rinse ith plent o
• Do not remove the Float and the
below.
3. Attach the Humidi ing
Filter and Tra .
• After maintenance, correctly
reattach the parts.
Ho to clean hard to remo e dirt.
NOTE
Kitchen detergent
(only Humidifying tray)
1. Fill the tray half-way with
water.
1
2. Add a small amount of
kitchen detergent.
2
Soak for 30
minutes.
3
NOTE Ho to install the Float and the Rollers
Float
3. Insert the tab on the other
side of the float into the
hole.
2. Insert the tab of the float
into the hole.
ater.
itric acid
(available at some drugstores)
2 1/2 cups of water
Rinse off the kitchen detergent or the descaling solution with clean water.
1. Insert the Float under
this tab.
Float
Tray Panel
100
3 cups of water
3 teaspoons
Soak for 30 minutes.
(When using lemon juice as your
descaling solution, allow for more
soak time.)
Tab
Cross-Section view
EN-13
Float
Roller
bottled lemon uice
ith no pulp
1/4 cup
Roller
Click
Click