Temperatura; General Data; Encoder Interface; Temperature - gefran SieiDrive EXP-FIH Instruction Manual

Numero impulsi encoder _____________________________ 600...9999
Frequenza di ingresso massima _______________________ 150kHz

Temperatura

Temperatura di immagazinamento: _____________________ -20°... +70°C
Temperatura di funzionamento: ________________________ 0°...+55°C
Queste temperature sono adeguate a quelle dell'inverter a cui la scheda è collegata.

General data

Internal power supply from the drive ____________________ +5VDC

Encoder interface

Interface type ______________________________________ optocoupled digital
Standard inputs ____________________________________ A+,A-,B+,B-
Encoder power supply _______________________________ 15V/24V
Voltage input range High level (on pin) ) (U
Voltage input range Low level (on pin) ) (U
Current input value (@ 15V, on pin) _____________________ 10mA
Current input value (@ 24V, on pin) _____________________ 17mA
No. encoder pulses _________________________________ 600 up to 9999
Max Frequency input ________________________________ 150kHz

Temperature

Storage temperature: ________________________________ -20°... +70°C
Operating temperature: ______________________________
These temperatures are adequate to those of the drive, to which the card is connected.
—————— Digital Encoder Input Expansion ——————
) ____________ 11 V up to25V
High
) _____________ <= 1.6V
Low
(-68...+158°F)
(32...+131°F)
encoder input interface
(-68...+158°F)
0°... +55°C
(32...+131°F)
9