PRIOR TO FIRST USE \\\
Charging the Vacuum
ATTENTION –
to the electrical outlet for the charging process.
The vacuum is partially pre-charged and will run for a short time.
ASSEMBLING THE VACUUM
We recommend fully charging the vacuum before use.
Charging the Vacuum
1. Set the vacuum onto the Storage/
NOTE: The battery charger must be
Charging Station, ensuring the
connected to the electrical outlet
for charging.
connection between the points
The vacuum is partially charged and will
on the vacuum with the Storage /
run for a short time. We recommend fully
charging the vacuum before use.
Charging Station (Fig. 1).
1. Set the vacuum onto the Storage/
Charging Station, ensuring the
connection between the points
2. Plug the battery charger into the
on the vacuum with the Storage/
Charging Station (Fig. 1).
Storage/Charging Station and into an
2. Plug the battery charger into the
electrical outlet (Fig. 2). The indicator
Storage/Charging Station and
into an electrical outlet (Fig. 2).
light on the vacuum will blink red
The indicator light on the vacuum
will blink red while the battery
while the battery is charging. When
is charging. When the indicator
light is green, the battery is fully
the indicator light is green, the battery
charged (Fig. 3). Charging time is
is fully charged (Fig. 3). Charging time
approximately 3 hours.
3. Remove the vacuum from the
is approximately 3 hours.
Storage/Charging Station and begin
vacuuming.
4. Unplug the battery charger when the
3. Remove the vacuum from the Sto-
vacuum is in use.
rage/Charging Station and begin
5. Always return the vacuum to the
Storage/Charging Station when not
vacuuming.
in use.
4. Unplug the battery charger when the
vacuum is in use.
5. Always return the vacuum to the
Storage/Charging Station when
not in use.
4
The battery charger must be connected
Charging Indicator Light
Blinking Red = Low Battery
Blinking Red = Charging
Solid Green = Fully Charged
Blinking Green = Fault
(see Troubleshooting)
Fig. 1
Fig. 2
Fig. 3
9
Need help?
Do you have a question about the VACUMATE Ultralight and is the answer not in the manual?