Maintenance And Care - djive VACUMATE Ultralight Manual

NOTE: Always turn off the vacuum
3. Shake the vacuum to release any debris
before performing any service.
that might be inside the dust cup.
Do not fill the dust cup past the

MAINTENANCE AND CARE \\\

Max Fill Line (Fig. 1).
4. When the dust cup is empty of debris,
firmly push the bottom onto the dust
Emptying the Dust Cup
cup until it clicks and is fully latched.
1. Hold the vacuum over a trash container.
Removing and Replacing the
2. Push the dust cup release button to
Removing and Replacing the
dust cup (for Cleaning)
open the bottom of the dust cup
(Fig. 2). The bottom will open and
dust bin (for Cleaning)
1. Push the dust cup removal button
the debris will fall into the trash
while pushing the dust cup away from
container (Fig. 3).
the vacuum to remove it from the
1. Push the dust bin removal button
vacuum (Fig. 4).
3. Shake the vacuum to release any debris
that might be inside the dust cup.
while pushing the dust bin away
2. Pull the metal ring to remove the filter
cartridge from the dust cup (Fig. 5).
from the vacuum to remove it from 4. When the dust cup is empty of debris,
firmly push the bottom onto the dust
3. Rinse the dust cup with warm water
the vacuum (Fig. 4).
cup until it clicks and is fully latched.
and allow to dry thoroughly before
re-attaching to the vacuum.
Removing and Replacing the
2. Pull the metal ring to remove the
4. Align the filter cartridge to the dust
dust cup (for Cleaning)
filter cartridge from the dust bin
cup and slide into place (Fig. 6).
1. Push the dust cup removal button
(Fig. 5).
5. Align the arrows on the dust cup and
while pushing the dust cup away from
the vacuum (Fig. 6) then slide until it
the vacuum to remove it from the
clicks into place.
vacuum (Fig. 4).
3. Rinse the dust bin with warm water
2. Pull the metal ring to remove the filter
and allow to dry thoroughly before
cartridge from the dust cup (Fig. 5).
re-attaching to the vacuum.
3. Rinse the dust cup with warm water
and allow to dry thoroughly before
4. Align the filter cartridge to the dust
re-attaching to the vacuum.
bin and slide into place (Fig. 6).
4. Align the filter cartridge to the dust
cup and slide into place (Fig. 6).
5. Align the arrows on the dust cup and
5. Align the markings on the dust bin
8
the vacuum (Fig. 6) then slide until it
and the vacuum (Fig. 6) then slide
clicks into place.
until it clicks into place.
8
14
Fig. 5
Fig. 5
the debris will fall into the trash
container (Fig. 3).
3. Shake the vacuum to release any debris
that might be inside the dust cup.
4. When the dust cup is empty of debris,
firmly push the bottom onto the dust
cup until it clicks and is fully latched.
Removing and Replacing the
dust cup (for Cleaning)
1. Push the dust cup removal button
Fig. 2
while pushing the dust cup away from
the vacuum to remove it from the
vacuum (Fig. 4).
2. Pull the metal ring to remove the filter
cartridge from the dust cup (Fig. 5).
3. Rinse the dust cup with warm water
and allow to dry thoroughly before
re-attaching to the vacuum.
4. Align the filter cartridge to the dust
cup and slide into place (Fig. 6).
Fig. 2
5. Align the arrows on the dust cup and
the vacuum (Fig. 6) then slide until it
clicks into place.
8
Fig. 1
Fig. 3
Fig. 3
Fig. 4
Fig. 6
Fig. 5
Fig. 4
Fig. 6
Fi