OPERATOR'S MANUAL
MANUEL D'UTILISATION
MANUAL DEL OPERADOR
18V BRUSHLESS, 1 in. SDS-PLUS
ROTARY HAMMER DRILL
PERCEUSE À PERCUSSION
ROTATIVE SDS-PLUS DE (1 po)
SANS BALAI DE 18V
TALADRO DE PERCUSIÓN ROTATORIO SDS-
PLUS (1 pulg.) SIN ESCOBILLAS DE 18V
P223
INCLUDES: Rotary Hammer Drill, Auxiliary
Handle Assembly with Depth Stop Rod,
Operator's Manual
TABLE OF CONTENTS
****************
Symbols ...............................................4
Assembly .............................................5
Operation ......................................... 5-8
Illustrations ................................... 10-12
Parts Ordering
and Service .......................... Back page
WARNING:
To reduce the risk
of injury, the user must read and un-
derstand the operator's manual before
using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
INCLUT : Perceuse à percussion rotative,
poignée auxiliaire et tige de butée de
profondeur, manuel del utilisation
TABLE DES MATIÈRES
****************
Symboles .............................................4
Dépannage ..........................................8
Entretien ...............................................9
Illustrations ................................... 10-12
Commande de pièces
et dépannage ..................... Page arrière
AVERTISSEMENT :
réduire les risques de blessures,
l'utilisateur doit lire et veiller à bien
comprendre le manuel d'utilisation avant
d'employer ce produit.
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
INCLUYE: Taladro de percusión rotatorio,
mango auxiliar con barra limitadora de
profundidad, manual del operador
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad para
herramientas eléctrica ..................... 2-3
Advertencias de seguridad de
taladro percusión rotatorio ..................3
Símbolos ..............................................4
Armado ................................................5
Funcionamiento ............................... 5-8
Corrección de problemas ....................8
Mantenimiento .....................................9
Illustraciones ................................ 10-12
Pedidos de piezas
y servicio ......................... Pág. posterior
ADVERTENCIA:
Pour
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
Para reducir
Need help?
Do you have a question about the ONE+ HP P223 and is the answer not in the manual?
Questions and answers
Cannot get the bit to engage in drill
If the bit is not engaging in the Ryobi ONE+ HP P223 drill, try the following steps:
1. Check the Mode Selector: Ensure the drill is set to the correct mode for drilling or chiseling as needed.
2. Secure the Bit: Make sure the bit is properly inserted and tightened in the chuck.
3. Verify the Clutch: If the clutch is slipping, remove any binding force on the bit and allow it to reset.
4. Inspect for Overload: If excessive pressure was applied, reduce the force and let the tool reset.
5. Check the Battery: If the LED light flashes three times, replace the battery with a fully charged one.
6. Allow Cooling Time: If the tool has overheated (9 LED flashes), let it cool before using again.
If the issue persists, inspect for any damage or wear on the bit or chuck.
This answer is automatically generated
P223 shows 3 flashes. Replaced battery with several other fully charged and hammer drill will not work. Still flashes 3 times