OPERATOR'S MANUAL
MANUEL D'UTILISATION
MANUAL DEL OPERADOR
8 V LITHIUM-ION DRILL
PERCEUSE 8 V LITHIUM-ION
TALADRO DE 8 V
DE IONES DE LITIO
HP108L
TABLE OF CONTENTS
****************
Symbols ..............................................6
Assembly ............................................ 7
Operation .........................................7-8
Parts Ordering
WARNING:
To reduce the risk
of injury, the user must read and un-
derstand the operator's manual before
using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
TABLE DES MATIÈRES
****************
perceuse ............................................4
Règles de sécurité concernment
chargeur .............................................5
Symboles ............................................6
Entretien .............................................9
Commande de pièces
et dépannage ....................Page arrière
réduire les risques de blessures,
l'utilisateur doit lire et veiller à bien
comprendre le manuel d'utilisation avant
d'employer ce produit.
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad para
herramientas eléctricas .................. 2-3
Advertencias de seguridad taladro ....4
Reglas de seguridad para el empleo
del cargador ......................................5
Símbolos ............................................6
Armado ..............................................7
Funcionamiento ............................. 7-8
Mantenimiento ...................................9
Illustraciones ....................................10
Pedidos de piezas
y servicio .......................Pág. posterior
ADVERTENCIA:
Pour
ducir el riesgo de lesiones, el usuario
debe leer y comprender el manual del
operador antes de usar este producto.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
Para re-
Need help?
Do you have a question about the HP108L and is the answer not in the manual?
Questions and answers
my roybl screwdriver will not recharge. I store it my garage and it has been inactive for several months. could battery need replacement?
Yes. If the Ryobi HP108L screwdriver battery will not recharge after being inactive for several months, it may need replacement. The manual advises returning the battery, charger, and stand to an authorized service center for electrical inspection if the battery does not recharge under normal conditions.
This answer is automatically generated
how to connect charger
To connect the charger for the Ryobi HP108L:
1. Insert the charger plug into the input jack, ensuring it is properly connected.
2. Use a normal household current of 120V AC, 60Hz.
3. Connect the charger to the power supply.
4. Charge for at least 9 hours after normal usage.
5. Keep the charger in a room-temperature environment, avoiding extreme heat or cold.
6. Remove the product from the charger once it is fully charged and ready for use.
This answer is automatically generated