Related Manuals for WADER Laundryprint Plus
Summary of Contents for WADER Laundryprint Plus
- Page 1 Laundryprint Getting Started Wader Labelling Systems Limited Carham Road, Hoylake, Wirral, England 0151 632 3464 www.wader.co.uk Version 1.0...
- Page 2 Identifying Printer Parts Unpack the printer and keyboard units and locate on a suitable surface near a mains outlet. Connect the keyboard & mains adaptor to the printer ( see fig.1 ). Ensure that the thermal tape & ribbon fig7 are installed ( see also Additional Reference pages sections 4 &...
- Page 3 Getting Started… Thermal Media Sizes & Re-order Codes.. Please see inside top cover label for details of sizes preinstalled Plain continuous thermal tape Butterfly die cut thermal tape For more information installing tape see Additional Reference section Fig 6 Adjust guides and install tape When using die cut tape Open printer hood as above...
-
Page 4: Ribbon Installation
Getting Started… Ribbon installation Thermal Laundry Ribbon Part Number TH-RIBBON Fig 7... - Page 5 Getting Started…Entering a label Stored within the printer are numerous standard label layouts that you can access, enter text & then print. If you have specified a custom designed layout these will be stored in the printer along with the standard layouts specified when ordered (samples and the form name will be enclosed).
- Page 6 Getting Started…entering a label Select & highlight the desired label layout you require by using the arrow keys (see attached list for pre loaded label) and then press the ENTER key to select. First Line of the label. Type the text to be printed on the designated line and press ENTER key to continue.
- Page 7 Getting Started…Other display screens. Printhead Open Printer hood not closed correctly. Press firmly until an audible click is noted. Check Ribbon Ribbon in need of replacement or not installed correctly. Check Media Out of tape or tape not correctly installed. Check the label sensor for die cut tape see fig 6.