Advertisement
3.
O S D Adjustment (P icture)
M enu
Provides preset picture settings optimized for various user environments such as editing a document, surfing the Internet, playing
games, watching sports or movies and so on.
• <Custom> If the preset picture modes are not sufficient, users can configure the <brightness> and <Contrast> directly using this
mode.
• <Standard> This mode provides the picture setting appropriate for editing a document and surfing the Internet (text + picture).
M ag icB rig ht
• <Game> This mode provides the picture setting appropriate for playing games that include lots of graphics and that require a fast
screen refresh rate.
• <Cinema> This mode provides brightness and sharpness settings similar to those of a TV for the best entertainment environment
(movie, DVD, etc.).
• <Dynamic Contrast> Controls the picture contrast automatically so that bright and dark pictures are balanced overall.
This menu is unavailable when <MagicAngle> or <MagicEco> is set.
This feature allows you to see optimal screen quality according to your viewing position
• <Off>
• <Lean Back Mode 1>
• <Lean Back Mode 2>
• <Standing Mode> :Select when viewing from the upper position
M ag icAng le
• <Side Mode> :Select when viewing from the left or right position
• <Group View Mode> :Select when two or more person view among
• <Custom> : When this function is selected ,setting for <Lean Back Mode 1> is applied by default .Users can set suitable picture
quality as needed
This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> or <Cinema> mode.
This menu is unavailable when <MagicColor> or <Color Effect>is set.
Removes vertical noise lines (line pattern) from the screen.
The location of the screen may be changed after the adjustment. In this case, move the screen so that the screen is displayed at
C oars e
the center of the display panel using the <H-Position> menu.
This function is only available in analog mode.
Removes horizontal noise lines (line pattern) from the screen.
If you cannot remove the noise completely with the <Fine> function, adjust the <Coarse> and then use the <Fine> function again.
Fine
This function is only available in analog mode.
:Select when viewing from the front position.
①
:Select when viewing from a slightly lower position
②
:Select when viewing from the lower position
③
④
⑤
D es cription
,
,
position at the same time.
① ④ ⑤
Advertisement
