ABB CGWB 13 Operator's Manual page 14

12
Assemble or Shorten the Sample Gas Line TBL 01-C
6
Use a heat gun (maximum temperature 120 °C!) to fuse the end of the
sample gas line and the end piece with the shrink sleeve.
1
Shrink sleeve
2
Sealing compound
NOTE
The maximum temperature of the heat gun may not exceed
120 °C, otherwise the shrink sleeve will be damaged!
7
Encapsulate the process line inlet with "End sealant".
A shortening set is enclosed with the sample gas line TBL 01-C.
Instructions for assembling and shortening the sample gas line are a
constituent of the shortening set.