Table of Contents
Advertisement
10
Assembling or Shortening the Sample Gas Line CGWB 13
(Dimensions in mm)
Step
Action
1
Cut back the sheathing of the sample gas line by approx. 250 mm
Cut the heating cable, so that it projects approx. 100 mm and the last
contact point is not more than 100 mm away from the end of the cable.
NOTE
Take note of the contact points in the heating cable and do not
cut at a contact point. If necessary, cut the sample gas line to
length by a further 250 mm.
1
Sample gas line
2
Sealing compound
3
Heating cable
2
Push back the heat insulation and encapsulate the end of the sheathing
with the silicone sealing compound "End sealant" from the shortening
set.
Advertisement
Table of Contents
