Advertisement
Your Air Purifier 6 is equipped with digital displays on both the top and front of the unit.
TOP CONTROL PANEL
Displays the current air quality status based on the AIR INFO option
selected, and includes controls that allow you to customize the
settings.
FRONT DISPLAY SCREEN
Displays the current air quality status based on the Air Info mode
selected on the top control panel.
Your air purifier includes a remote control that can turn the power on or off, and adjust the settings.
USING THE REMOTE CONTROL
To use the remote control, aim it at the front display screen and press the
buttons on the remote. The remote control has a range of 15 ft. (5 meters).
For best results, make sure no obstacles are between the remote control
and the display screen.
REMOTE CONTROL BATTERY
This remote uses a CR2025 3-volt replaceable battery. To replace the
battery, follow the steps below.
1. With a Phillips-head screwdriver (not included) unscrew the battery tray
on the back of the remote.
2. Slide out the battery tray.
3. Remove the old battery and dispose of it according to local regulations.
Take additional caution to keep old battery out of reach of children.
4. Insert the new battery, making sure the polarities (+) (–) are oriented
correctly.
5. Reinsert the battery tray and use the screw to completely secure it in
place.
CONTROL PANEL
MAX
MAX
MAX
REMOTE CONTROL
MAX
MAX
TOP CONTROL PANEL BUTTONS
On/Off: Press to turn the power on or off.
MAX
Air Info: Press to switch between air quality display options. See the
Air Info Settings section for more information.
Auto Mode: Press to turn on Auto Mode. In this setting the fan
speed automatically adjusts based on real time air quality readings.
As the air quality improves, the fan speed will decrease. If air quality
worsens, the fan speed will increase. Leave your unit in Auto Mode for
optimal filter life and performance.
Filter Life: Press to show the remaining filter life in hours. Once
the filter has 0 hours remaining, the FILTER LIFE button will flash
to indicate the filter needs to be changed. See Installing and Removing the
Filter section for more information.
Brightness: Adjusts the brightness of both the front display
screen and the top control panel. Switch between 3 options: full
brightness, partially dim, fully dim.
Shut-Off Timer: Set the number of hours for the air purifier to run
before it automatically shuts off. Timer can be set between 1–12
hours.
Fan Speed: Adjusts the speed of the fan. Select one of 4 settings: 1
Low, 2 Medium, 3 High, 4 Maximum. Note: If fan speed is manually
changed, auto mode will be deactivated. For tips on optimal fan setting, see
Optimizing Fan Speed section.
REMOTE CONTROL BUTTONS
1. On/Off: Turns the unit on/off.
2. Air Info: Switch between air quality display options.
3. Auto: Enables Auto Mode.
4. Brightness: Adjusts brightness.
5. Fan Speed: Adjusts fan speed.
6. Shut-Off Timer: Sets timer.
1
2
3
4
5
6
MAX
MAX
Advertisement
