Craftsman 125.DD20A Operator's Manual page 9

KNOW YOUR DRILL
See Figure 1, page i
The safe use of this product requires an
understanding of the information on the
product labeling and in this Operator's
Manual as well as knowledge of the project
you are attempting. Before use of this
product, familiarize yourself with all operating
features and safety rules.
ADJUSTABLE TORQUE CLUTCH
The drill has a 19+1 position clutch: The
torque adjustment clutch can be turned to
select the best torque for your application.
TWO-SPEED GEARBOX
The two-speed gearbox is designed for
driving or drilling at either LO or HI speeds.
A slide switch is located on top of the tool for
selecting the appropriate speed range.
VARIABLE SPEED
The variable-speed trigger switch delivers
higher speed with increased trigger
pressure and lower speed with decreased
trigger pressure within the selected speed
range.
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten
or release the bit in the chuck jaws.
FEATURES
MODE SELECTOR (on the adjustable
torque clutch)
The mode selector allows you to select
among the following modes:
Driver mode (1-19 positions), and Drill mode
( ).
DIRECTION-OF-ROTATION SELECTOR
(FORWARD / CENTER-LOCK /
REVERSE)
The drill has a direction-of-rotation selector
located above the trigger switch for changing
the direction of bit rotation.
Set the selector in the OFF (center-lock)
position to reduce the possibility of accidental
starting when tool is not in use.
LED WORKLIGHT
The LED worklight, located above the trigger
switch of the drill, illuminates when the trigger
switch is depressed. This feature provides
extra light for increased visibility.
9 ― English