Craftsman 125.DD20A Operator's Manual page 14

OPERATION FOR DRILL/DRIVER
WARNING:
To avoid serious personal
injury, always remove the battery pack from
the tool when cleaning or performing any
maintenance.
WARNING:
Always wear safety goggles
or safety glasses with side shields when
using compressed air to clean the tool. If the
operation is dusty, also wear a dust mask.
Belt Hook (Available Separately)
See Figure 12, page iii
A belt hook is available for separate purchase.
The hook enables you to conveniently hang
the tool from your belt when tool is not in use.
Install the hook on either side of the tool.
Insert the tab of the hook into the slot in the
tool base. Secure the hook by tightening the
screw through the hole in the hook into the
hole in the base.
To purchase the hook, see Replacement
Parts on page 18 of this manual.
14 ― English