TP-Link AX1500 User Manual page 46

FAQ
Q1 How to reset the extender to its factory default settings?
• With the extender powered on, use a pin to press the
extender will reboot.
• Log in to the extender's web management page. Go to
Backup & Restore
Q2 What should I do if I forget my login password?
Refer to FAQ > Q1 to reset the extender, and then visit
a new login password.
Note: The extender must be reconfigured after a reset to access the internet. Please note down your login password
for future logins.
Q3 What should I do if I forget my wireless password?
The extender shares the same wireless passwords as those of your host networks.
Q4 What should I do if I can't access the web management page?
This can happen for a variety of reasons. Please try the methods below to log in again.
• If your computer is wirelessly connected, make sure that you have connected to the
extender's SSID.
• Make sure your computer is configured as
Obtain DNS server address
• Verify that http://tplinkrepeater.net
Enter.
• Use the IP address to access the extender. The default IP is 192.168.0.254. If the
extender is connected to the router, you should go to your router's DHCP client list to
obtain the extender's current IP address.
• Reset the extender and try again.
Q5 I have enabled wireless MAC filter, wireless access control, or access
control list (ACL) on my router What should I do before configuring
the extender?
When a device connects through the extender to your router, the MAC address of the
device shown on the router is translated to another MAC address. If your router's MAC
filter, wireless access control, or ACL is enabled, the devices connected to the extender
cannot get an IP address from the extender and cannot access the Internet.
To solve this problem, please follow the steps below:
and click Factory Restore.
automatically.
is correctly entered in the web browser and press
RESET button for 1 second. The
Settings
http://tplinkrepeater.net
Obtain an IP address automatically
> System Tools >
to create
and
43