Change Lan Settings; Adjust Wi-Fi Coverage - TP-Link AX1500 User Manual

Chapter 5
5 3

Change LAN Settings

The extender is preset with a default LAN IP 192.168.0.254, with which you can log in to
the web management page. The LAN IP address, together with the Subnet Mask, also
defines the subnet that the connected devices are on. If the IP address conflicts with
another device on your local network or your network requires a specific IP subnet, you
can change it.
1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set
for the extender.
2. Go to Settings > Network.
3. Select Use the following IP
4. Enter a new IP Address as needed and leave the
5. Enter the gateway that is in the same subnet as the IP address. The gateway is usually
the LAN IP address of your router.
6. Enter the DNS IP address provided by your ISP.
7. Click Save.
5 4

Adjust Wi-Fi Coverage

You can set the extender's Wi-Fi coverage depending on how large you want your Wi-Fi
area to be.
1. Visit http://tplinkrepeater.net
for the extender.
2. Go to Settings > Advanced Settings
3. Select your desired Wi-Fi coverage level for the extender.
address.
and log in with your TP-Link ID or the password you set
> Wi-Fi Coverage.
Customize Your Network
Subnet Mask as the default settings .
26