Advertisement
(5) Eliminating slack on the printing paper, close the front panel.
(6) To change paper, as holding the paper holder in the arrowed direction, re-move the core. Remove, at this time,
excessive paper by using the LF switch.
After setting the paper, press LF switch once.
Then, printer goes to data input printing mode.
Keep the paper winding direction correct.
While in replacing of paper, do not send data from host terminal.
Do not pull the paper in reverse direction of paper feed. T his may cause abnormality of print head.
In case the paper is fed diagonally in paper supplying side or paper removing side, paper jam may occur.
In this case, turn OFF the power switch immediately and pull out the excessive paper slowly at straight
direction.
18
CBM-920 User's Manual
CITIZEN
Advertisement
