Advertisement
1
Interface Connector
2
Feed Switch
3
Paper Lamp
4
Knob
5
Front Cover
6
Ribbon Cover
7
Mounting bracket
8
Paper Holder
Connected to various hosts via cables. On connection, confirm beforehand that power
supply of the host and the printer are OFF. The power cable, also, is held in this
connector.
Make sure to connect FG terminal with an earth. Do not connect this terminal with the
lines except for an earth.
With this switch pressed, paper is fed. Use this to insert paper and to put space. With
pushing this switch, power is turned ON, self-print function is conducted.
Lights up when paper has become scarce or run out.
(Only when Paper Near End/Paper End function has been set.)
Put out when paper has been inserted.
Use this to set paper or to open the front cover on changing of paper.
Open/close this on setting or changing of paper.
Open/close this to change ink ribbon.
This opens when the left side of the front face is pulled forward.
Use this to fix the main body to a rack, etc.
Paper setting section.
Placing paper from the insertion port, set paper.
12
CBM-920 User's Manual
CITIZEN
Advertisement
