Advertisement
Quick Links
Modular scenario switch
036 12
Characteristics
Voltage
Frequency
Dimensions
Description
±
100 - 240 V
50 - 60 Hz
2 x 1,5 mm
2
1 x 2,5 mm
2
EN 50065
IEC 60669-2-1
4 modules
Preset mode
indicators
-5°C à + 45°C
Auxiliary inputs
Auxiliary inputs
9
LEARN indicator
LEARN key
Control key
1, 2, 3, 4, 5, 6, 7, 8
Advertisement
Related Manuals for LEGRAND 036 12
Summary of Contents for LEGRAND 036 12
- Page 1 Modular scenario switch 036 12 Description Characteristics Auxiliary inputs ± 100 - 240 V Voltage LEARN indicator Frequency 50 - 60 Hz 2 x 1,5 mm 1 x 2,5 mm LEARN key EN 50065 IEC 60669-2-1 Dimensions 4 modules Preset mode indicators -5°C à...
- Page 2 Before carrying out the installation, read the instructions and take account of the product's specific mounting location. Do not open up the device. All Legrand products must be exclusively opened and repaired by personnel trained and 100-240 V 50-60 Hz approved by LEGRAND.
-
Page 3: Operation
Operation As a transmitter : This product can simultaneously control groups of receivers linked to it during learning using buttons 1, 2, 3, 4, 5, 6, 7 or 8. Products that can be connected to auxiliary inputs include : - Push-buttons - Switches - Clocks - Badge readers... - Page 4 Operating local keys Short press Long press Preset(*) Scenario 1 / End of Preset No action Scenario 2 No action Preset(*) Scenario 1 / End of Preset No action Scenario 4 No action On return of power : Scenario 5 Increasing light level After a break in power supply, the Scenario 6...
- Page 5 The indicator light The indicator light The indicator light The indicator switches off flashes slowly flashes quickly light flashes Learning a scenario Step 1 : start the learning phase (on the TRANSMITTER) Press LEARN Press one of the three control buttons Step 2 : add an actor to the scenario (on the RECEIVER) Press LEARN Press one of the three control buttons...
- Page 6 Modifying a scenario Step 1 : open the scenario (on the TRANSMITTER) The indicator lights on all products blinks quickly Press LEARN Press the control button that controls the scenario Step 2 : modify the status of a scenario receiver (on the RECEIVER) Press LEARN Press LEARN Press the desired...
- Page 7 Deleting a scenario (on the TRANSMITTER) Step 1 : delete all the scenarios linked to the control button The scenario is deleted Press LEARN Press the control buttonand hold for 10 secs Step : delete all the scenari Product goes back to factory settings Press LEARN Press LEARN...
-
Page 8: Problems And Solutions
Problems and solutions Problem Cause Solution The learn indicator light comes on Learning is impossible. Install compatible products. for 5 seconds. The learn indicator light comes on The number of saved Delete the unused scenarios. for 10 seconds. transmitters is more than 32. During learning the learn indicator The learning mode shuts down Restart the learning.