Related Manuals for Inter-m PD-6359A
Summary of Contents for Inter-m PD-6359A
- Page 1 Operation Manual Power Distributor PD 6359A * Rack mount products in the Western Hemisphere(North America, South America, and the Caribbean) do not have handles installed due to customer preference.
- Page 2 A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products.
-
Page 3: Table Of Contents
Caution when assembling the Racks ..................3 Package and accessory includes ....................3 Equipment Setting and Checking ....................4 Front Panel ............................6 Rear Panel ............................7 Applications ..........................10 Block Diagram ..........................11 Specifications ..........................12 Service Procedures............................14 Schematic.............................14 Parts List ............................14 Variations and Options ......................14 Warranty ...........................14 PD-6359A... -
Page 4: Unpacking
POWER DISTRIBUTOR Unpacking Unpacking Although your PD-6359A is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation. As with most electronic devices, we strongly recommend you retain the original packaging. In the unlikely event the product must be returned for servicing, the original packaging (or reasonable equivalent) is required. -
Page 5: Features
- When supplying the rack power, interlock AC OUTLET (Switched: 15A×3/Unswitched: 3A×1) and DC power output (DC 24V, 5A) should be less than rated outputs. Package and accessory includes Package and accessory includes 1. LAN cable x 1EA 2. Euro Terminal Block (5.08mm pitch) 3P x 1EA 3. User manual x 1EA PD-6359A... -
Page 6: Equipment Setting And Checking
2) Set the termination switch to LOAD only for the first and last-numbered equipment units. All others must be set to OPEN. Equipment 1 Equipment 2 Equipment 3 Equipment N S/W: LOAD S/W: OPEN S/W: OPEN S/W: LOAD ※Caution: Communication error may occur if setting is performed incorrectly. PD-6359A... - Page 7 2) Remove the AC power cord, then check the operation status with battery power in case of black out. ※To prepare the black out, the battery and battery charger (PB-6207) is required. 3) Check on/off controls through remote terminal and monitoring status for communication. PD-6359A...
-
Page 8: Front Panel
It displays the AC power voltage. 2. DC VOLT METER If PD-6359A is operated by AC power, DC output voltage is displayed. In case of AC power failure, if ※ When AC/DC is switched, the voltage is displayed after about 10 seconds. -
Page 9: Rear Panel
2 sec., AC power is output from SWITCHED 2. At 2 sec later after AC power output from SWITCHED 2, then AC power is output from SWITCHED 1. If PD-6359A is turned off, AC power output stops in reverse order. If 3 of BY PASS setting switch is ON position, AC power is to output simultaneously from SWITCHED... - Page 10 It is the terminal which supplies the power to the device operated by DC 24V. 8. REMOTE TERMINAL This is Remote Terminal to be remotely operated PD-6359A. Please connect PD terminal at rear panel of ECS-6216P our company’s model. Upon a contact is output from PD terminal of ECS-6216P and upon a contact is input to remote terminal of PD-6359A then PD-6359A is to be operated automatically.
- Page 11 12. DC 24V BATTERY INPUT TERMINAL (BATTERY INPUT) It is the terminal which connects the emergency power to use the system in case of black out, and It normally connects to the battery. Caution to polarities when it connects. PD-6359A...
-
Page 12: Applications
1 2 3 4 MAX5A 220-240V~50/60Hz 220-240V~50/60Hz 220-240V~50/60Hz 220-240V~50/60Hz UNSWITCHED REMOTE IN DC OUT 24V MAX5A (AMP ONLY) (RACK ONLY) MAX25A SWITCHED DC OUT 24V SWITCHED DC OUT 24V MAX5A TOTAL MAX 5A TOTAL MAX 20A, 4800W AC INPUT 220-240V~50/60Hz,24A,5800W PD-6359A... -
Page 13: Block Diagram
POWER DISTRIBUTOR Block Diagram Block Diagram PD-6359A... -
Page 14: Specifications
POWER DISTRIBUTOR Specifications Specifications PD-6359A SWITCHED: 10A, 3Group (3 Group × 3 = 9 channel) UNSWITCHED: 3A, 1Group (2 channel) AC/DC Output UNSWITCHED: 1 channel (24V, 5A Max) EMERGENCY: 1 channel (24V, 5A Max) AMP ONLY: 9 channel (24V, 25A Max) - Page 15 POWER DISTRIBUTOR ※ DIMENSIONS PD-6359A...
-
Page 16: Procedures
To obtain specific warranty information and available service locations contact Inter-M directly or the authorized Inter-M Distributor for your specific country or region. - Page 17 NOTE PD-6359A...
- Page 18 NOTE PD-6359A...
- Page 19 POWER DISTRIBUTOR PD-6359A...
- Page 20 Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).