Pangolin FB4 SE Manual

2021/05/05 22:11
FB4 SE Manual
In this manual, menu option of the FB4 are enclosed in square brackets ([ ]) (e.g. Set [Operation Mode]
to [BEYOND/QS], Change [Artnet Settings] » [Timeout] to 3.0).
Features
100Mbit Ethernet Port
SDXC card reader which supports up to 1TB SDXC card
12-bit color lines (up to 6 colors)
12-bit X and Y axes control for up to 80K scan speeds
Direct connection for shutters
Rotary encoder for 1 hand operation
Full Color OLED Display
Stand Alone operation
Controllable through DMX and Artnet
Options
ILDA daughterboard for ILDA in and through.
DMX daughterboard for XLR in and through.
EtherCON daughterboard for network connection.
FB4 Operation Mode
The FB4 has various operation modes. These operation modes determine which functions the FB4 will
perform. Operation modes are explained below, however it's important to know when the FB4 stores
settings and what will happen after a power failure or power cycle.
When starting up the FB4 the first time, the default [Operation Mode] is [BEYOND/QS]. Once you
change the [Operation Mode] of the FB4, the FB4 will store this change after two seconds of inactivity.
The new settings will directly become the new default and will stay active, even after a power cycle.
Complete Help Docs - https://wiki.pangolin.com/
1/21 FB4 SE Manual