Advertisement
9
10
1. Assemble Rear Cover
with middle frame and fix
it by screws*4
1. Align and place the stand
riser on the stand base
2. Open the screw handle at
the bottom of the stand
base and turn it clockwise
to secure the stand
assembly
3. Close the screw handle
4. Carefully insert the tabs
on the stand riser into the
slots on the display back
cover and lower the stand
assembly to snap it into
place
- 14 -
Screw-
driver
(Screw
Torque:
8-10 kgf)
Note:
When
connecting
the stand
assembly to
the display,
do not
place the
stand riser
directly on
the display
back panel.
Doing so
may
damage the
pogo pins
on the
stand due
to
misalignme
nt.
Advertisement
