Linksys One Ready Communications Solution
3
The Stack Management Page contains the following fields:
•
Master Election — Indicates the method of electing the Stack Master device. The possible
values are:
-
Automatically — The master is selected automatically by software.
-
Force Master — The unit is forced to be master of the stack. Note that only units
with the Unit ID of 1 or 2 can be the stack master.
•
Stacking Ports After Reset — Allows the user to decide what cable type is in use. The
possible values are:
-
Combo Ports — Indicates that the combo port is used as the stacking port.
-
Copper Ports — Indicates that the copper port is used as the stacking port.
Chapter 3: Connecting the Switch
Configuring Units and Ports
Stack Management Page
22