Cisco SFE2000 Release Note page 5

1 February 2007
Headline Description
FireFox browser will not show Interface Details if the user Adds
a Multicast Group entry and then selects it from the Bridge
Bridging->Multicast
Multicast Address combo box.
->Multicast Group
Recommended Workaround: If possible use Internet Explorer for
this setting.
HTTP connection terminates when trying to delete a very large
Bridging-> VLAN
group of VLANs (e.g., 256)
Management->
Recommended Workaround: Delete VLANs in groups smaller
Properties
than 256.
System ->System When changing the management VLAN, the DHCP address on
Management-> IP the default VLAN is not removed from the previous VLAN
Addressing management.
Headline Description
When a stack composed of 3 units is connected via the copper
ports (uplink port, POE connection port) and the user tries to
access the POE settings for unit 2, then the device loses its HTTP
PoE
connection.
Recommended Workaround: Increase the Web time out
parameter.
Headline Description
QOS->Bandwidth-> Edit The default value of the Committed Burst Size (CBS) filed is
Bandwidth shown as 128000, but it is not supported with 10/100 ports.
Headline Description
In Add RMON Alarm, if a value is related to the GVRP counter
Statistics->RMON-
name, the message 'Illegal Object' is displayed, and the entry is
>Alarm
not added to the 'AlarmTable'.
Linksys One Ready Communications Solution SFE2000/
SFE2000P and SGE2000/SGE2000P
Linksys One Ready Communications Solution
Layer 2
PoE Features
Quality of Service
RMON & Statistics
RELEASE NOTES
Reference
67870
67322
67761
Reference
67690
Reference
67952
Reference
67602
5