Known Restrictions And Limitations - Cisco SFE2000 Release Note

1 February 2007

Known Restrictions and Limitations

Headline Description
The time zone setting is not applied after you upload the
System->System
configuration from the TFTP server.
Management->Time-
Recommended Workaround: After you upload the configuration
>System Time
file, change the time zone setting in the Time Zone Offset file.
There may be cases where copying a running configuration file to
a start up configuration file with saved VLAN values will issue
System -> Admin -> File
an error after an upgrade.
Management -> Save
Configuration
Recommended Workaround: Verify that you are not trying to
create the same value twice.
Cannot add users to the SNMP via the GUI.
System -> SNMP ->
Recommended Workaround: Create SNMP groups before adding
Security -> Users
users.
Deleting 3 or more SNMP communities advanced entities from
the table may result in an error "Request Entity Too Large".
System->SNMP-
>Security->Communities
Recommended Workaround: Delete one SNMP community
entity at a time.
Combo ports MGBSX1(T) 100M SFP registers its speed as 1000M.
Admin->Diagnostics-
Cable length for Fast Ethernet Copper Ports is not displayed.
>copper ports
In a stacked configuration, running an optical test may result in
Admin->Diagnostics-
traffic lost on the GE port.
>copper ports
Recommended Workaround: Disable STP on the port.
After pressing the "Test" button, the "Advance" button is not
displayed.
Admin->Diagnostics-
Recommended Workaround: After switching to another page and
>copper ports
returning to this page, the cable length and the "Advance" button
are displayed.
System->System Mgmt- Zoom view shows SFP ports number 1 & 2 description only. For
>Zoom SGE2000 Only.
Linksys One Ready Communications Solution SFE2000/
SFE2000P and SGE2000/SGE2000P
Linksys One Ready Communications Solution
Management & System Features
RELEASE NOTES
Reference
66906
68698
68695
68090
68440
69338
66147
69344
65363
3