Adjust Device Position; Connecting To Power - Z-EDGE Z3Pro User Manual

2.3 Adjust Device Position

Loosen the nut to swivel the device vertically. Click into place and secure by
tightening the nut. Rotate the device horizontally for a clear view.

2.4 Connecting to Power

Use only the supplied car charger to power the dash cam and charge the
built-in battery.
1. Plug the USB cable (15) on the
car mount into the car
dash cam's USB connector (2).
2. Plug one end of the USB
charging cable into the USB
Connector on the car mount (17).
3. Plug the other end into the car
charger, and insert that into
your vehicles lighter socket.
-6-