Center Joystick - PG Drives Technology R-NET OMNI Technical Manual

PG D T
RIVES ECHNOLOGY
R Ind Lamp Short
L Ind Lamp Failed
R Ind Lamp Failed
Over-current
Overtemp. (Acts)
Overtemp. (Lamps)
DIME Error
Memory Error
PM Memory Error
Bad Cable
Bad Settings
Module Error
System Error
SID Detached
User Switch Detached
Over Pressure
Gone to Sleep
Charging
3.1

Center Joystick

The most common cause of this trip is if the SID is deflected away from center
before and during the time the control system is switched on. The joystick
displaced screen will be displayed for 5 seconds, if the SID is not released within
that time then a trip is registered. Although a trip screen is not displayed the
system log will show the trip and numbers of occurrences.
•
Ensure that the SID is centered and power-up the control system.
If the trip is still present then the SID or Omni may be defective.
144
Refer to section 3.11
Refer to section 3.12
Refer to section 3.12
Refer to section 3.13
Refer to section 3.14
Refer to section 3.15
Refer to section 3.16
Refer to section 3.17
Refer to section 3.18
Refer to section 3.19
Refer to section 3.20
Refer to section 3.21
Refer to section 3.22
Refer to section 3.23
Refer to section 3.24
Refer to section 3.25
Refer to section 3.26
Refer to section 3.27
SK78813/5
O – D
MNI IAGNOSTICS