Enabling And Disabling Ir Codes - PG Drives Technology R-NET OMNI Technical Manual

PG D T
RIVES ECHNOLOGY
The first time an IR Code has been learnt, then it is
necessary to cycle the power to the Omni. If other IR
Codes are already learnt, then this is not necessary.
5

Enabling and Disabling IR Codes

IR codes can be enabled or disabled in the IR Set Up menu. If a code is
disabled it will not transmit and will not appear in the User Menu.
To disable an IR code, select the – key on the front panel of the Omni. A
disabled IR codes appears with an X against the highlighted Command.
To enable an IR code, select the +key on the front panel of the Omni. An
enabled code appears with a check against the highlighted Command.
118 SK78813/5
O – IR
MNI