Eastwood 31662 Instructions Manual page 4

SAFETY INFORMATION
4
• This tool has high-speed, rotating components which can quickly cause se-
vere injury. Keep fingers and hands away from moving parts when operating.
Wear thick, well-fitting work gloves and keep loose clothing, sleeves, cords,
jewelry and hair away from moving parts.
• This tool could eject sparks at high speed which can ignite flammable ma-
terials or injure others nearby. Do not operate near flammable materials and
keep all persons and pets away from the work area.
• Do not force drill or exert excessive side forces on tool while in use as the
drill body can suddenly kick back or twist causing severe hand or wrist
injury. Drill bits can suddenly break with excessive side force.
• Always make sure the workpiece is securely clamped or anchored to avoid
sudden movements which could result in injury.
• Always disconnect Drill from air supply when changing drill bits or accesso-
ries to prevent accidental tool starting and potential serious injury.
• Frequently inspect Chuck and overall tool condition. If damage is discovered,
discontinue tool use immediately. ONLY USE drill bits or accessories rated
for 2,200 RPM or greater use otherwise serious injury can result in the event
of failure.
• This Drill will vibrate during use! Repeated exposure to vibration may cause
physical injury.
Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com
INJURY HAZARD!
VIBRATION INJURY HAZARD!