Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Eastwood 21285
- Page 1 Item #21285 ELECTRIC DRILL INSTRUCTIONS...
-
Page 2: Specifications
The EASTWOOD ELECTRIC DRILL is great for use on virtually all metals including steel, aluminum, brass and more. The powerful 6.3 Amp motor and 1/2” capacity chuck powers drill bits though projects cleanly and with ease. Drills wood, fiberglass and other materials equally well. Features a “plugged–in”... -
Page 3: Important Safety Information
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. To order parts and supplies: 800.343.9353 >> eastwood.com... - Page 4 Use of the power tool for operations different from those intended could result in a hazardous situation. Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com...
-
Page 5: Additional Safety Information
If excessive vibration is felt, discontinue use im- mediately and disconnect tool from electrical supply. Inspect bit or accessory for damage. Do not resume use until resolution is found. To order parts and supplies: 800.343.9353 >> eastwood.com... - Page 6 • Rotate the Chuck counter- FIG. 1 clockwise (as viewed from Open Close the front end of the Drill) to open Chuck Jaws (FIG 1). Chuck Jaws " " " " Auxiliary Handle Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com...
- Page 7 (FIG 2). • Rotate the Chuck Clockwise (as viewed from the front end of the Drill) to close Chuck Jaws and tighten securely with the included Chuck Key (FIG 2). FIG. 2 To order parts and supplies: 800.343.9353 >> eastwood.com...
-
Page 8: Operation
Drill body handle (FIG 3). This Drill is equipped with a Variable Speed Trigger Control. The motor speed will increase the farther the Trigger is pressed. FIG. 3 Forward/Reverse Lever Trigger Trigger Lock Button Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com... -
Page 9: Maintenance
IMPORTANT NOTE: The following maintenance should be performed before each use: • Inspect Chuck for looseness or premature wear • Clean dirt and debris from Chuck Jaws • Clean dirt and debris from motor air cooling slots To order parts and supplies: 800.343.9353 >> eastwood.com... -
Page 10: Troubleshooting
Allow the rotating Bit do the drilling. Applied to Do Not force! Drill Bit Motor Overheats Dirt and Debris Buildup in Use a brush or compressed air to remove debris. Motor Cooling Air Slots Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com... - Page 11 NOTES To order parts and supplies: 800.343.9353 >> eastwood.com...
-
Page 12: Additional Items
Shrinker/Stretcher Set If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: techelp@eastwood.com PDF version of this manual is available online >> eastwood.com/21285manual The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA US and Canada: 800.343.9353 Outside US: 610.718.8335...