Diagnostic Operation - Emerson IE Series Manual

Figure 3: Connections and Wiring
LINE INPUT
FROM SOURCE
GND

Diagnostic Operation

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. See NFPA 70E,
CSA Z462, or NOM-029-STPS.
Failure to follow these instructions will result in death or serious injury.
Indicator Status ON =
The device is installed correctly and the line side has power.
Indicator Status OFF =
Check connections, verify that the line voltage is at the point of connection; if all is correct,
then replace the device.
Dry Contact Terminal
N/O Normally Open
COM Common
N/C Normally Closed
LINE LOAD
L/L1 L/L1
N/L2 N/L2
RELAY
CONTACTS
GND NO COM NC GND
DANGER
Power OFF Power ON
Open
Common Common
Closed
TO LOAD OR
EQUPMENT
TO PROTECT
TO REMOTE
INDICATION
IF NEEDED
Closed
Open
IE Series
Page: 5