Everet EVP220N User Manual
  1. Manuals
  2. Brands
  3. Everet Manuals
  4. Camcorder
  5. EVP220N
  6. User manual

Everet EVP220N User Manual

20x ndi fhd ptz video camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
EVERET EVP220N
20x NDI FHD PTZ Video Camera
User Manual
Version V1.0
（English)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EVP220N and is the answer not in the manual?

Questions and answers

Related Manuals for Everet EVP220N

Summary of Contents for Everet EVP220N

  • Page 1 EVERET EVP220N 20x NDI FHD PTZ Video Camera User Manual Version V1.0 （English)

  • Page 2: Table Of Contents

    6. Avoid stress, vibration and damp during transportation, storage and installation. 7. Do not detatch the camera housing and cover. For any service, please contact authorized Everet technicians. 8. Video cable and control cable should be individually shielded, and cannot be substituted with other cables.

  • Page 3: Packing List

    10. Use a dry and soft cloth to clean the camera housing. Applied with neutral cleaning agent when there is need to clean. To avoid damage on the camera lens, never use strong or abrasive cleaning agents on the camera housing. 11.
  • Page 4 QUICK START Check if following products are in the box Camera DC12V input Power supply cable RS232 Cable USB 3.0 Cable IR Remote Control Power on the camera with the 12V adapter or use a POE+ switch. PoE+ switch requirements: (PoE+ IEEE 802.3af/at compliant with total power of 126W up to 30W per port) Recommended unmanaged PoE+ network switches: TP link TL-SG1008MP 8-port...
  • Page 5 NOTE: if you cannot pan or tilt the camera. Please go to chapter: IR Remote ‘SET Camera 1-4’ in this manual and follow instructions on how to do Controller this. Please check the default camera IP address (192.168.1.188) for operation in your network or simply change IP address in OSD menu settings using IR remote controller.

  • Page 6: Dial Switch Settings (At The Bottom Of The Camera)

    Dial Switch Settings (at the bottom of the camera) Dial Switch（ARM） SW-1 SW-2 Instruction 1 OFF Updating mode 2 ON Debugging mode 3 OFF Undefined 4 ON Working mode Dial Switch WWW.EVERETIMAGING.COM...
  • Page 7 SW-3 SW-4 Instruction 1 OFF reserve 2 ON reserve 3 OFF reserve 4 ON reserve Dial Switch (USB) SW-5 SW-6 Instruction 1 OFF Undefined 2 ON Working mode 3 OFF Updating mode 4 ON Undefined WWW.EVERETIMAGING.COM...

  • Page 8: Product Highlights

    PRODUCT HIGHLIGHTS ● Panasonic 1/2.8 inch 5MP sensor providing 1080P60 full HD video ● High quality optical lens 60.5 degree field of view, 20x optical zoom, 2x digital zoom ● NDI|HX, HDMI, 3G-SDI, USB 3.0 video outputs interface ● 1080p60 video over IP, H.264, H.265 encoding ●...
  • Page 9 ● IR remote control WWW.EVERETIMAGING.COM...

  • Page 10: Technical Specifications

    TECHNICAL SPECIFICATIONS HDMI 1920*1080P60/50/30/25/59.94/29.97/24 (v1.4) 1920*1080i60/50/59.94 1280*720P60/50/30/25/59.94/29.97 1920*1080P60/50/30/25/59.94/29.97/24 1920*1080I60/50/59.94 1280*720P60/50/30/25/59.94/29.97 NDI | HX 2 1920*1080@3~60, (v4.5 SDK) 1280*720@3~60, 1024*576@3~60, 640*360@30 (low bandwidth mode) Video Format Main Stream: 1920*1080@3~60, 1280*720@3~60, 1024*576@3~60; Sub Stream: 1280*720@3~60, 1024*576@3~60, 640*360@3~60. USB 3.0 1920*1080P60/50/30/25 1280*720P60/50/30 1280*720P25 1024*576P30 960*540P30 640*360P30...
  • Page 11 Network Speed 1000M Video encode H.264/H.265(default: H.264) Bit Rate Control Variable Bit Rate, Constant Bit Rate Video Bit Rate 1024Kbps~16384Kbps IP Protocol TCP/IP, HTTP, RTSP, DHCP ,RTMP, Onvif(2.4), NDI(V4.5) Visca over IP(TCP&UDP), HTML5, Visca, Pelco P, Pelco D Supported Daisy Chain Support RS232 serial daisy chain Minimum Lux 0.1 lux...

  • Page 12: Camera Interface

    Dimension 220mm×190mm×173mm Net Weight 1.5KG CAMERA INTERFACE 1.Camera Lens 6. Tripod Screw Hole 10. HDMI port 2.Camera Base 7. Installation Hole 11. 3G-SDI port 3.IR Receiver Panel 8. RS232 control port (input) 12. USB 3.0 4.Power Indicator Light 9. RS232 control port(output) 13.

  • Page 13: Camera Dimensions

    CAMERA DIMENSIONS WWW.EVERETIMAGING.COM...

  • Page 14: Ir Remote Controller

    POWER IR REMOTE CONTROLLER By pressing the POWER key when the camera is on, the camera will rotate and go in the ‘stand-by’ mode. When the camera is in stand- by mode and you Press the power button again, the camera will boot and automatically go back to the Default PTZ position.
  • Page 15 SETTING 1-4 CAMERAS ZOOM KEY( ON THE RIGHT SIDE) The SET keys are used to connect one of the = Zoom in CAM buttons to a specific camera. For example. If you have a EVP212, EVP220 and = Zoom out EVP230 and you want to configure them as follow: NAVIGATE KEY: UP/DOWN/LEFT/RIGHT...
  • Page 16 Change Video output resolution for SDI, HDMI and USB 3. Long press one of the blue resolution buttons until the screen turns black. When the screen turns black let go of the button and the video output will automatically appear. WWW.EVERETIMAGING.COM...

  • Page 17: Osd Menu

    OSD MENU 1. Press the MENU key on the IR remote controller, to enter the OSD menu as bellow: 2. After entering the main menu, use the UP/DOWN keys on the IR remote controller to navigate through the menu. Once selected, the main menu will change to blue background, and the right side will show all sub menu options.
  • Page 18 5. System SYSTEM PROTOCOL VISCA,PELCO-P,PELCO-D Default：VISCA ADDRESS VISCA:1~7 PELCO-P/D:1~255 Default：1 BAUD RATE 2400,4800,9600,115200 Default：9600 PTL LOCK Protocol lock: once set, above protocol setting will be Default：OFF locked RS485 RS485 ON/OFF Default：OFF VISCA To select VISCA sources Default： Optional from via COM and via IP（VISCA over IP） OVER ALL LANGUAGE English...
  • Page 19 6. Exposure EXPOSURE EXPOSURE MODE AUTO, MANUAL, SHUTTER, IRIS, BRIGHT Default：AUTO SHUTTER Shutter speed:1/8~1/10000, only valid under manual mode Default：AUTO IRIS Iris setting: CLOSE~F1.5, only valid under manual mode Default：AUTO GAIN Gain setting:0dB~28dB , only valid under manual mode Default：AUTO BRIGHT Bright setting:0~15 Default：8...
  • Page 20 Image IMAGE WB MODE AUTO, INDOOR, OUTDOOR, MANUAL, PUSH, ATW Default：AUTO Auto: Automatically detects light in the room and selects the best white balance option for you. Indoor: Preset settings for indoor camera use. Outdoor: Preset settings for outdoor camera use. Manual: You Set the white balance options based on Red and Blue gains.
  • Page 21 FOCUS Select focus mode: AUTO/MANUAL Default：AUTO WWW.EVERETIMAGING.COM...
  • Page 22 8. Quality QUALITY 2D NR 2D noise reduction: the bigger value, the less noise on Default：OFF image, the lower resolution 3D NR 3D noise reduction: OFF/AUTO/0~4, the bigger value, the Default：AUTO less motion noise on image, high value will cause image smear.
  • Page 23 9. PTZ SPEEDBYZ SpeedByZoom: proportional speed, the bigger zoom, the Default：ON slowerspeed FLIP.HOR Flip horizontal Default：OFF FLIP VER Flip vertical Default：OFF PT SPD Pan Tilt speed Default：18 ZOOM SPD Zoom speed Default：5 MENU MIR Turn on/off left/menu mirror function Default:NORMAL PRE FRZ Preset Freeze function Default: OFF...
  • Page 24 10. Format FORMAT 1080P60 1080I50 Once selected, press OK key to confirm, if it is the selected video format, there is no change. 1080P50 1080I59.94 1080P30 720P60 1080P25 720P50 1080P59.94 720P30 1080P29.97 720P25 1080P24 720P59.94 1080I60 720P29.97 WWW.EVERETIMAGING.COM...
  • Page 25 11. IP DHCP ON/OFF Using up/down/left/right navigation button to select item to set and using number button to set parameter. 192.168.001.188 Press menu button to return. MASK 255.255.255.000 GW (Gateway) 192.168.001.001 MAIN Stream 1920*1080 1280*720 1024*576 BIT RATE 10240~16384k SUB Stream 1280*720, 1024*576,640*360 BIT RATE 10240~16384k...
  • Page 26 12. Reset RESET SYS RESET Reset communication parameter to default CAM RESET Reset camera parameter to default PT RESET Reset pan/tilt parameter to default ALL RESET Reset all parameter to default WWW.EVERETIMAGING.COM...
  • Page 27 13. Info INFO IR ADDR Camera IR control address USB firmware version CLIENT Default client end protocol: VISCA ARM VER ARM firmware version FPGA VER FPGA firmware version CAM VER Camera version RELEASE Software release date WWW.EVERETIMAGING.COM...

  • Page 28: Webinterface

    Webinterface 1. Login Run a browser and input IP address (default IP address is 192.168.1.188) to enter login interface as seen below. Default account Username: admin Password: admin NOTE: If you cannot enter the webinterface with the default IP address there are two common situations that could be causing this problem.
  • Page 29 PC and Camera are connected to a DHCP router. 1. Get into the OSD menu of the camera with the IR Remote controller. 2. Navigate to IP. 3. Set DHCP to ‘ON’ Press on the menu button of the IR Remote controller until you exit.
  • Page 30 3. Video Encode Settings Set following settings Enable/disable Main or Substream Encode mode: H.264/H.265 Profile: Baseline, MP, HP RTSP Address can used to get video feed in for instance VLC or other RTSP Decoders Resolution chose the encoding resolution. Set bitrate 7.
  • Page 31 NOTE: We suggest keeping the resolution and framerate the same as your decoding project to prevent unnecessary encoding process. The I-Frame we suggest to set double as high as the framerate unless you are capturing sports or events with lots of movements per second.
  • Page 32 all networks, there are some cases where it is important to know how this works in order to properly configure networks utilizing managed data flows and QoS protocols 5. Image Adjust Focus: Set camera to auto or manual focus. Enable or disable Digital Zoom. WWW.EVERETIMAGING.COM...
  • Page 33 Exposure mode: Auto, Manual, Iris Priority, Shutter Priority and Brightness Priority WWW.EVERETIMAGING.COM...
  • Page 34 White balance mode: Auto, Indoor, Outdoor, One Push, Auto Tracking (ATW), Manual Image: enable mirror, flip, backlight compensation, WDR (wide dynamic range) and set Gamma WWW.EVERETIMAGING.COM...
  • Page 35 Image quality: configure brightness, sharpness, contrast and saturation Noise reduction: includes 2D/3D reduction. There is an on/off option for 2D, and off/auto/1~4 options. WWW.EVERETIMAGING.COM...
  • Page 36 WWW.EVERETIMAGING.COM...
  • Page 37 6. Ethernet In the image below you see the default Ethernet settings of the camera. This can be adjusted to your network preferences DHCP: Enable/Disable Enable DHCP if the camera is connected to a DHCP router that dynamically grants an IP address, netmask, gateway, and DNS.
  • Page 38 How to update Click “select file” icon, to open dialog box, select to open the file. First upgrade the ARM file and then the ISP file. Click “upgrade” to start the upgrade process. Only use upgrade files from everet.eu support website.
  • Page 39 8. Reset Options: 9. Account Setting: WWW.EVERETIMAGING.COM...

  • Page 40: Getting Started With Ndi

    GETTING STARTED WITH NDI NDI is registered trademark of NewTek, Inc. Getting started with Everet Pro Grade PTZ cameras with NDI® | HX 4.5 SDK is equivalent to adding connected devices to your network. Simplifying setup for live streaming systems Everet supports PoE,...
  • Page 41 I-Frame interval: set to the double of the framerate. If framerate is 50 I-Frame should be 100. *The Everet cameras also support encoding NDI with H.265. Please follow instructions below if you are using vMix. If you are using windows you need to download the HEVC APP from the MS store at first.
  • Page 42 NOTE: These steps will need to be repeated each time the vMix version is updated, as it will overwrite the file each time. NDI TOOLS https://www.ndi.tv/tools/#download-tools There are a handful of free NDI® applications for MAC and Windows that will help in your production workflow.
  • Page 43 NDI® | VLC Plug In Present video content and other supported multimedia to the network as IP sources directly from VLC Media Player. The NDI VLC Plugin encodes the output from each instance of the free player to NDI in real time, making media files of virtually any format available for use in your live production.
  • Page 44 Connect to and access NDI channels on other networks via IP address Advanced tab allows preference for TCP or UDP connections, multicast operation, and optional discovery server supportNEW NDI® Test Patterns Send a reference signal to other NDI devices on your network to confirm connectivity and enable audio and video calibration.

  • Page 45: Visca Over Ip

    VISCA OVER IP VISCA over IP means VISCA protocol over IP, to reduce RS232/RS485 cable layout (the controller must support VISCA over IP) Communication port spec: ● Control port: RJ45 Gigabit LAN ● IP protocol: IPv4 ● Transmit protocol: UDP ●...
  • Page 46 Payload type: Data definition as specified: Name Value (Byte Value (Byte Value (Byte 0) VISCA 0x01 0x00 Stores the VISCA command. command VISCA inquiry 0x01 0x10 Stores the VISCA inquiry. VISCA reply 0x01 0x11 Stores the reply for the VISCA command and VISCA inquiry, or VISCA device setting command.
  • Page 47 Controller will save sequence number of each command, when one command sent, the sequence number of the command will add 1, when the sequence number becomes the max value, it will change to 0 for next time. The peripheral equipment will save sequence number of each command, and return the sequence number to the controller.
  • Page 48 If controller shows it is overtime, resend the commands to check peripheral’s status. The resent command sequence number is same as last command, the following chart will list the received message and status after resending the commands. Sequence chart as specified Sequence chart when command lost Sequence chart when returned message lost...

This manual is also suitable for:

Evp220Evp230

Table of Contents