Everet EVP412N User Manual
  1. Manuals
  2. Brands
  3. Everet Manuals
  4. Camcorder
  5. EVP412N
  6. User manual

Everet EVP412N User Manual

12x uhd ndi ptz video camera
Hide thumbs Also See for EVP412N:
Table of Contents

Advertisement

Quick Links

Download this manual
EVERET EVP412N
12x UHD NDI PTZ Video Camera 
User Manual 
 
Version V1.0 
（English) 

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EVP412N and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Everet EVP412N

Summary of Contents for Everet EVP412N

  • Page 1 EVERET EVP412N 12x UHD NDI PTZ Video Camera  User Manual    Version V1.0  （English) ...

  • Page 2: Table Of Contents

    CONTENT    2  SAFETY GUIDES 3  PACKING LIST 3  QUICK START 1. Check all cable connections before power on. 3  2. Dial Switch Settings (at the bottom of the camera) 4  5  PRODUCT HIGHLIGHTS 6  TECHNICAL SPECIFICATIONS 8  CAMERA INTERFACE 8 ...

  • Page 3: Safety Guides

    Avoid stress, vibration and damp during transportation, storage and installation.    Do not detatch the camera housing and cover. For any service, please contact authorized    Everet technicians.  Video cable and control cable should be individually shielded, and cannot be substituted    with other cables. ...

  • Page 4: Packing List

    PACKING LIST  Check all bellow items when open the package:    Camera  1  Power Adapter  1  Power Cable  1  RS232 Control Cable  1  USB 3.0 Cable  1  Remote Controller  1    QUICK START   Check all cable connections before power on.    ...

  • Page 5: Dial Switch Settings (At The Bottom Of The Camera)

    2.  Dial Switch Settings (at the bottom of the camera)  Dial Switch（ARM）     SW-1  SW-2  Instruction  1  OFF  OFF  Updating mode  2  ON  OFF  Debugging mode  3  OFF  ON  Undefined  4  ON  ON  Working mode  Dial Switch     SW-3  SW-4  Instruction ...

  • Page 6: Product Highlights

    2  ON  OFF  Working mode  3  OFF  ON  Updating mode  4  ON  ON  Undefined  PRODUCT HIGHLIGHTS   ● Advanced ISP, 1/2.5 inch 8MP Sony sensor providing 3840x2160 p30 Ultra HD video  resolution   ● 4K lens with 12x Optical Zoom + 2x Digital Zoom, with 72,5 degree field of view ‣  NDI|HX, 3G-SDI, HDMI, USB output video simultaneously, 4K video over NDI|HX and ...

  • Page 7: Technical Specifications

    TECHNICAL SPECIFICATIONS   Video Format  HDMI  3840*2160P30/25  1920*1080P60/50/30/25/59.94/29.97/24  1920*1080I60/50/59.94  1280*720P60/50/30/25/59.94/29.97  SDI  1920*1080P60/50/30/25/59.94/29.97/24  1920*1080I60/50/59.94  1280*720P60/50/30/25/59.94/29.97  USB  1920*1080P60/50/30/25（USB3.0）  1280*720P60/50/30（USB3.0）  1280*720P25（USB3.0 & USB2.0）  1024*576P30（USB3.0 & USB2.0）  960*540P30（USB2.0）  640*360P30（USB2.0）  512*288P30（USB2.0）  NDI|HX  3840*2160@15~30,  1920*1080@15~30,  1280*720@15~30,  1027*576@15~30,  640*360@30 (low bandwidth mode)  Video Interface  HDMI, 3G-SDI, RJ45, USB3.0  Sensor ...
  • Page 8 IP Protocol  TCP/IP, HTTP, RTSP, DHCP​ ,​ Onvif  POE  Supported  Daisy Chain  Support RS232 serial daisy chain  Minimum Lux  0.1 lux  White Balance  Auto/Indoor/Outdoor/Manual/Auto/Sodium Lamp Auto/Sodium Lamp  Exposure  Auto/Manual/Bright/Shutter/Iris  Focus  Auto / Manual  Iris  Auto / Manual  Electric Shutter  Auto / Manual  Gamma ...

  • Page 9: Camera Interface

    CAMERA INTERFACE​     1.Camera Lens    6. Tripod Screw Hole  10. HDMI port  2.Camera Base  7. Installation Hole   11.3G-SDI port  3.IR Receiver Panel  8. RS232 control port (input)  12, USB port  4.Power Indicator Light    9. RS232 control port(output)  13, RJ45 port ...

  • Page 10: Ir Remote Controller

    POWER  Under normal working mode, short press  IR REMOTE CONTROLLER   POWER key, to enter standby mode;  Press it again, the camera will do  self-configuration, then go back to HOME  position.  It will go to preset position if power on model  has been set before. ...
  • Page 11 FOCUS KEY ( ON THE LEFT)  Manual focus, only valid under manual focus  model.  ZOOM KEY( ON THE RIGHT SIDE)  Set the zoom rate  NAVIGATE KEY: UP/DOWN/LEFT/RIGHT  Under working mode, use navigate key to set  the pan tilt, and select menu when enter OSD.  OK /HOME KEY ...

  • Page 12: Visca In（Rs232 Port)

      VISCA IN（RS232 PORT)     No.  V_IN  V_OUT  1  DTR  DTR  2  DSR  DSR  3  TXD  TXD  4  GND  GND  5  RXD  RXD  6  A    7  IR OUT    8  B    VISCA IN  RS485  6  A (+)  7 ...
  • Page 13 VISCA NETWORK SETUP:    SERIAL PORT CONFIGURATION:   Parameter  Value  Parameter  Value  Baud rate  2400/4800/9600/115 Stop Bit  1bit  200  Start Bit  1 bit  Check Bit  None  Date Bit  8 bit        12  WWW.EVERETIMAGING.COM ...

  • Page 14: Visca Protocol

    VISCA PROTOCOL   PART1 CAMERA RETURN COMMAND  Ack / Completion Message     Command  Note  Packet  ACK  z0 41 FF  Returned when the command is accepted.  Completion  z0 51 FF  Returned when the command has been executed.  z = camera address+8   ...
  • Page 15 Direct with speed  8x 0A 04 47 0t 0p 0q 0r 0s FF  t: spd 0~7  pqrs: Zoom Position (0(wide) ~0x4000(tele))  CAM_DZoom  ON  8x 01 04 06 02 FF     OFF  8x 01 04 06 03 FF  Combine Mode  81 01 04 36 00 FF  Combine with optical zoom control ...
  • Page 16 fluorescent  8x 01 04 35 09 FF     OnePush Trigger  8x 01 04 10 05 FF     CAM_RGain  Reset  8x 01 04 03 00 FF  Manual Control of R Gain  Up  8x 01 04 03 02 FF  Down  8x 01 04 03 03 FF  Direct ...
  • Page 17 Direct  8x 01 04 0C 00 00 0p 0q FF  pq: Gain Positon (0~0x0E)  CAM_Bright  Reset  8x 01 04 0D 00 FF  Bright Setting  Up  8x 01 04 0D 02 FF  Down  8x 01 04 0D 03 FF  Direct  8x 01 04 4D 00 00 0p 0q FF  pq: Bright l Positon (0~0x1B) ...
  • Page 18 CAM_PTSpeed  PT Speed  8x 01 04 C1 00 00 0p 0q FF  pq :PT speed 0x05~0x18  CAM_ZoomSpeed  Zoom Speed  8x 01 04 D1 00 00 0p 0q FF  pq :Zoom speed 0x01~0x07  CAM_ZoomDisplay  On  8x 01 06 C2 02 FF    ...
  • Page 19 VideoSystem Set(Sony)     81 01 04 24 72 0p 0q FF  pq: Video format  1080P60 0x2e  1080P50  0x2f  1080I60  0x01  1080I50  0x04  1080P30  0x06  1080P25  0x08  720P60  0x09  720P50  0x0c  720P30  0x0e  720P25  0x11  1080P5994 0x13  1080I5994 0x02  1080P2997 0x07  720P5994 0x0a ...
  • Page 20 rate  8x 01 04 C3 01 0p 0q 0r 0s 0m  pqrsmnxy: bitrate  0n 0x 0y FF  (1024~10240kbps)  Encode Mode  8x 01 04 C3 02 0p 0q FF  Mode sel:0xpq  0x00:h264  0x01:h265  Frame Rate  8x 01 04 C3 03 0p 0q FF  Frame rate:0xpq ...

  • Page 21: Part3 Camera Control Command

    Upleft  8x 01 06 01 VV WW 01 01 FF  Upright  8x 01 06 01 VV WW 02 01 FF  DownLeft  8x 01 06 01 VV WW 01 02 FF  DownRight  8x 01 06 01 VV WW 02 02 FF  Stop ...
  • Page 22 CAM_FocusPosInq  8x 09 04 48 FF  y0 50 0p 0q 0r 0s FF  pqrs: Focus Position  CAM_2D_Inq  8x 09 04 A5 FF  y0 50 03 FF  (0~0x01)  p: 0: off  1: on  CAM_3D_Inq  8x 09 04 53 FF  y0 50 03 FF  (0~0x05) ...
  • Page 23 CAM_ApertureInq  8x 09 04 42 FF  y0 50 00 00 0p 0q FF  pq: Aperture Gain  CAM_PresetExistInq  8x 09 04 3F pp FF  y0 50 0q FF  pp: Memory number  q: 1=preset exist  0=preset not saved  SYS_MenuModeInq  8x 09 06 06 FF  y0 50 02 FF ...

  • Page 24: Visca Pan Tilt Absolute Position Value

    MainstreamResolutionInq  8x 09 04 C2 00 FF  y0 50 0p 0q 0r 0s 0m 0n 0x  pqrs : Column(x size)  0y FF  mnxy: Line (y size)  only support:  1920*1080 ,1280*720,  3840*2160 ,1024*576  MainstreamRateInq  8x 09 04 C2 01 FF  y0 50 0p 0q 0r 0s 0m 0n 0x  pqrsmnxy: bitrate (1024~20480) ...

  • Page 25: Visca Pan Tilt Speed Value

    45  0x0288        90  0x0510        135  0x0798        170  0x0990           VISCA PAN TILT SPEED VALUE  Pan(Degree/Second)  Pan(Degree/Second))  0  0.3  0  0.3  1  1  1  1  2  1.5  2  1.5  3  2.2  3  2.2  4 ...

  • Page 26: Pelco-D Protocol Command List

    PELCO-D PROTOCOL COMMAND LIST     Function  Byte1  Byte2  Byte3  Byte4  Byte5  Byte6  Byte7  Up  0xFF  Address  0x00  0x08  Pan Speed  Tilt Speed  SUM  Down  0xFF  Address  0x00  0x10  Pan Speed  Tilt Speed  SUM  Left  0xFF  Address  0x00  0x04  Pan Speed  Tilt Speed ...

  • Page 27: Pelco-P Protocol Command List

    Response  PELCO-P PROTOCOL COMMAND LIST   Function  Byte1  Byte2  Byte3  Byte4  Byte5  Byte6  Byte7  Byte8  Up  0Xa0  Address  0x00  0x08  Pan Speed  Tilt Speed  0Xaf  XOR  Down  0Xa0  Address  0x00  0x10  Pan Speed  Tilt Speed  0Xaf  XOR  Left  0Xa0  Address  0x00 ...

  • Page 28: Osd Menu

    Query Zoom  0xA0  Address  0x00  0x5D  Value High Byte  Value Low  0xAF  XOR  Position  Byte  Response  O SD MENU   ​ 1. Press the MENU key on the IR remote controller, to enter the OSD menu as bellow:    2. After enter the main menu, use the navigate UP/DOWN key to select the main menu. Once selected,  the main menu will change to blue background, and the right side will show all sub menu options. ...
  • Page 29 VISCA  To select VISCA sources  Default：  Optional from OVER COM and OVER IP（VISCA  OVER COM  over IP）  LANGUAGE  Optional Item: Chinese、English  Default：English     EXPOSU EXPOSURE  AUTO、MANUAL、BRIGHT、SHUTTER、IRIS  Default：AUTO  RE  MODE  SHUTTER  Shutter speed:1/8~1/10000, only valid under  Default：AUTO  manual mode  IRIS  Iris setting:CLOSE~F1.5, only valid under  Default：AUTO ...
  • Page 30 3D NR  3D noise reduction:OFF/AUTO/0~4, the bigger  Default：AUTO  value, the less motion noise on image, high  value will cause image smear.  SHARPNESS  Sharpness setting: 0~15, the higher value, edge  Default：AUTO  of the image will be sharpen  CONTRAST  Set contrast level  Default：50HZ ...

  • Page 31: Ip Address Setting

       IP  DHCP  ON/OFF  Using up/down/left/right  navigation button to  IP  192.168.001.188  select item to set, and  using number button to  MASK  255.255.255.000  set parameter. Press  menu button to return.  GW (Gateway)  192.168.001.001  MAIN Stream  3840*2160/1920*1080  BIT RATE  0~15360k  SUB Stream  720P/1024*576/640*360 ...

  • Page 32: Web Settings

       UVC CONTROL 1. Only run the client software after the USB3.0 camera has completed self-configuration (the LED will  light up in blue, no flashing)  2. Make sure the USB3.0 camera is recognized by the PC Device Manager.  3. Make sure the interval of video format switching is more than 3 seconds.  4.
  • Page 33   2. Parameter Setting  Click “Setting” to enter into the settings interface as following:         Video Encode:​ set image encode mode, main stream and sub stream resolution/bit rate/frame rate,  bit rate control way, and I-frame interval etc as above image   ...
  • Page 34 Image Adjust​ : to set focus, exposure, white balance, image, image quality, noise-reduction      Focus​ including focus mode, default focal distance, digital zoom etc        Exposure​ includes exposure mode, shutter speed, gain, iris, brightness, and anti-flicker.     ...
  • Page 35   Image​ includes mirror, flip, backlight compensation, Gamma, WDR(wide dynamic range).        Image Setting​ includes brightness, sharpness, contrast, saturation        Noise reduction​ includes 2D/3D reduction. There is an on/off option for 2D, and off/auto/1~4 options.     ...
  • Page 36 Firmware upgrade​ : for camera upgrades, currently only for ISP part updates.   How to update  Click “select file” icon, to open dialog box, select to open the file    Click “upgrade” to start the upgrade process. Only use upgrade files from everet.eu support website.       ...

  • Page 37: Using Vlc To View Rtsp/Rtmp Video

        Account Setting​ : is used for setting your camera account and password  First Input the accountname, then input password twice, click ok to finish settings.    Please remember account and password, otherwise you are not able to login.   ...

  • Page 38: Getting Started With Ndi

      NDI is registered trademark of NewTek, Inc. Getting started with Everet Pro Grade PTZ cameras with NDI® is equivalent to adding connected  devices to your network. Simplifying setup for live streaming systems Everet supports PoE, high  quality 4K video, tally and control using a standard gigabit enabled network and native integration of ...

  • Page 39: Visca Over Ip

    VISCA OVER IP  VISCA over IP means VISCA protocol over IP, to reduce RS232/RS485 cable layout (the controller must  support VISCA over IP)    Communication port spec:  ● Control port: RJ45 Gigabit LAN  ● IP protocol: IPv4  ● Transmit protocol: UDP  ●...
  • Page 40       Payload type:  Data definition as specified:   Name  Value (Byte  Value (Byte  Value (Byte 0)  0)  0)  VISCA  0x01  0x00  Stores the VISCA command.  command  VISCA inquiry  0x01  0x10  Stores the VISCA inquiry.  VISCA reply  0x01  0x11  Stores the reply for the VISCA ...
  • Page 41 Controller will save sequence number of each command, when one command sent, the sequence  number of the command will add 1, when the sequence number becomes the max value, it will  change to 0 for next time. The peripheral equipment will save sequence number of each command,  and return the sequence number to the controller. ...
  • Page 42 If controller shows it is overtime, resend the commands to check peripheral’s status. The resent  command sequence number is same as last command, the following chart will list the received  message and status after resending the commands.          ...
  • Page 43   Sequence chart when command lost Sequence chart when returned  message lost    Note: Do not set IP address, subnet mask, gateway parameter in VISCA over IP command.               42  WWW.EVERETIMAGING.COM ...

Table of Contents