Advertisement
CHAPTER 3
FUNCTIONING
3.1 CONTROL DEVICES
The machine is provided with the following control devices:
SWITCH 1-0-2:
Position 1 – START
Position 0 – STOP
Position 2 – THE FOOT FUNCTION
on the front panel for 310 – 420 TG:
- Black switch Set time (setting the working time);
- Red switch stoppage;
- Green light Machine starts.
3.2 FUNCTIONAL VERIFICATION
After you have inserted the line cord into the socket, the machine is ready for the functional verification.
START:
press the button ( 1 ), the machine will start.
STOP:
press the button ( 0 ), the machine will stop.
EXCEPT FOR MODELS 420/500 RP
START TO PEDAL:
Pressing the switch in position 2, the machine does not start, but waits. Applying light pressure to the foot
control, the rollers start spinning and the machine is ready for use.
STOP TO PEDAL:
Lifting his foot from the foot pedal the machine stops.
Finally, START THE MACHINE WITHOUT USING IT, LET IT RUN FOR 1 MINUTE AND MAKE SURE IT
IS FUNCTIONING PERFECTLY.
Advertisement
