Mail Settings; Detection Setup; Motion Detection - Foscam Huntvision User Manual

4.3 Mail Settings

If you want the camera to send emails when a motion is detected, here Mail will need to be configured first.
● After all the settings and click Test to check if the settings are correct, and click Save to complete the settings.

4.4 Detection Setup

Huntvision cameras support Motion Detection and Sound Detection Alarm, when the motion or sound has
been detected, the IP camera will make an alarm with several alarm actions such as making sound, sending
email, taking snapshot, recording video and pushing message to the phone.

4.4.1 Motion Detection

NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and anytime.
20
● Access to your camera from a Web
Browser, and go to Settings > Network >
Mail Settings. Check the Enable and
complete the settings.
a). Sender Email: Your sender email should
support SMTP, or mail setting will failed;
b). SMTP Server/Port/User Name/Pass-
word - Please check these information with
your Sender Email Server;
c). Receiver: Your alarm email will be sent
to the receivers, the maximum receivers
will be four.