Mail Service Settings - Foscam FI8906W User Manual

3.11 Mail Service
3.11 Mail Service
If you want the camera to send emails when motion has been detected, Mail Service Settings
will need to be configured.
1----- Sender Mailbox for sender must support SMTP
2----- Receiver Mailbox for receiver need not support SMTP,you can set 4 receivers
3----- SMTP Server/ Port
Some SMTP servers have their own port, such as 587 or 465 and Transport Layer Security
usually is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS
and SMTP Port must be set to 465 or 25 or 587, which port you choose should be decided by
which Transport Layer Security you select.
4---- SMTP user ID account of the sender email address
5----Submit Click Submit to take effect
6----Test Click Test to see if SMTP has been successfully configured.
NOTE: Click Submit first before choosing Test.
Click Test to see if SMTP has been successfully configured.
Shenzhen Foscam Intelligent
Shenzhen Foscam Intelligent
Tel: Tel: 86 86 755 755 2674 2674 5668 5668 Fax: Fax:
Settings
Settings
Enter SMTP server for sender. SMTP port is usually set as 25.
Technology Co., Limited
Technology Co., Limited
86 86 755 755 2674 2674 5168 5168
2
Figure 3.31
w ww.foscam.
w ww.foscam.
1
4
6
5
com
com
3
37
37