Installing The Router; Connecting An Ethernet Device - Cisco 805 Install Manual

Installing the Router

Installing the Router
To install the router, perform the following tasks in the following order:
Connect an Ethernet device.
1
Connect a serial device.
2
Connect a terminal or PC (for software configuration or router troubleshooting).
3
Connect the power supply.
4
Mount the router.
5
Verify the router installation.
6

Connecting an Ethernet Device

You can connect the following devices to the Ethernet port:
•
A hub
•
A server, PC, or workstation with a 10- or 10/100-Mbps NIC
Table 2-1 lists the Ethernet devices you can connect to the router with the yellow Ethernet
cable and the appropriate settings of the router HUB/NO HUB button and the hub
equivalent of the HUB/NO HUB button. The default setting of the router HUB/NO HUB
button is HUB (in).
2-6
Cisco 805 Router Hardware Installation Guide