Setting Up The Printer - Canon Pixma G3060 Series Getting Started

Setting Up the Printer

1. Box Contents
•
Print Heads
2. Removing Packing Materials
1
Remove and dispose of any packing materials
and orange tape.
2
Open the scanning unit / cover, remove and
dispose of the orange tape and protective
material inside.
a
3. Installing the Print Heads
1
Open the print head locking cover.
2
Take out each print head from the package and
remove the label.
•
Ink Bottles
•
Power Cord
•
Safety and Important Information
•
Getting Started (this manual)
b
3
Remove the protective tape.
4
Insert the C (color) print head on the left and the
B (black) print head on the right.
5
Close the print head locking cover and press
down until it clicks.
6
Press down both joint buttons completely until
they click.
Check!
7
Close the scanning unit / cover.
•
Open the scanning unit / cover fully and then close it.
a
b
Caution
Watch your fingers.
1