Rtc Setup - Mackie ONYX Series Owner's Manual

RTC Setup

RTC is short for 'Real Time Clock'. Recordings require a time
stamp, so if the RTC is not set up correctly (or at all), then
your SD recordings could be compromised, ruined or just plain
unavailable, lost in the ether
would not be your intent when recording
are the steps to set up the RTC on your Onyx mixer.
1. Press and hold the FX and SD buttons down simultaneously
for one second. Doing so will reveal the Settings screen.
STUDIO COMMAND
HOLD FOR SETTINGS
Ok, that's not entirely true... the recordings will still be successful.
1
However, they will be dated 1999 – "2000 zero zero party over oops
out of time, so tonight I'm gonna party like it's 1999" – and it will mess
up the sorting of the files.
6
Onyx Premium Analog Mixer with Multi-Track USB
. We're pretty confident that this
1
. With that said, here
1
PRESS TO SELECT
SD
2. Rotate the encoder clockwise until 'Set Time/Date'
is highlighted and press the encoder down to select.
3. Now it's time to set the date and time. Rotate the encoder
to the current year followed by pressing the encoder down
to select. Once the current year has been selected and the
encoder pushed down, the next parameter – month – will be
highlighted.
4. Follow the same steps to update the month, day and time .
5. Rotate the encoder until 'Confirm' is highlighted and press
the encoder down to indeed confirm the changes
See below for a visual representation on how to update the RTC.
You should only have to do this one time unless you
live in a region that observes daylight savings time.
Unfortunately, you will also need to update the RTC
at the time.