Appendix B: Technical Information - Mackie ONYX Series Owner's Manual

Appendix B: Technical Information

Onyx Specifications
Noise Characteristics
Equivalent Input Noise (EIN)
(150 Ω Source Impedance, 20 Hz to 20 kHz)
Mic in to Insert Send out, max gain
Residual Output Noise
All outputs, master levels off, all channel levels off
All outputs, master levels unity, one channel level unity
Frequency Response
Mic input to any output (gain at unity, +0 dB / –1 dB )
Distortion (THD+N)
(22 Hz to 80 kHz bandwidth)
Mic in to Main Out (+4 dBu output)
Attenuation and Crosstalk
Adjacent Inputs @1 kHz
Inputs to Outputs @1 kHz
Fader Off @1 kHz
Mute Switch @ 1 kHz
Common Mode Rejection Ratio (CMRR)
Mic in to Main out, max gain, 1 kHz
Maximum Levels
All inputs
Main Mix XLR
All other outputs
Impedances
Mic in
Channel Insert Return
–128 dBu
All other inputs
Phones out
–98 dBu
All other outputs
–88 dBu
Equalization
All Channels (except 1/8" stereo channel)
Low
Mid (Mono channels)
20 Hz to 30 kHz
Mid (Stereo channels)
High
Low Cut Filter
<0.01%
Digital Effects
Number of Effects Presets
–90 dB
Meters
–80 dB
Main L/R Mix
–85 dB
Two columns of 12 segments each:
–90 to –100 dB
OL, +15, +10, +6, +3, 0 (0 dBu), –2, –4, –7, –10, –20, –30
USB
70 dB
Format
I/O
A/D/A
+22 dBu
+28 dBu
+22 dBu
SD
2 x 2 / 24-bit / 96 kHz
3.3 kΩ
10 kΩ
≥20 kΩ
25 Ω
120 Ω Unbalanced,
240 Ω Balanced
±15 dB @ 80 Hz
±15 dB
100 Hz – 8 kHz
±15 dB @ 2.5 kHz
±15 dB @ 12 kHz
18 dB/octave @ 100 Hz
12
USB 2.0
Multiple Inputs,
2x2 Stereo Outputs
24-bit, 44.1 kHz, 48 kHz, 96 kHz
Owner's Manual
35