Mackie ONYX Series Owner's Manual page 28

Flanger Parameters and Values
Parameter Low Value
Rate 0
Depth 10
Blend 0
EQ
Frequency 400 Hz
Width (Q) 0.5
Gain -8 dB
LPF 6.0 kHz
HPF 80 Hz
The rate (Hz) and depth (ms) determine
how many cycles per second the chosen
effect oscillates. However, the rate and depth
of Chorus 1, Chorus 2 and Flanger is expressed
as 0.1x Hz / ms which translates the value that
the processor utilizes. An easy way to understand
the value is to take the number below the virtual knob
and "move" the decimal one point to the left (or multiply
by 0.1). For example, if rate is displayed as 37, then
it's really 3.7 Hz.
Lastly, onto the final three multi-purpose effects
(Delay + Reverb, Delay + Chorus and Reverb + Chorus).
DELAY + CHORUS
TIME
500
EQ
Time – This knob sets the current delay time
in milliseconds, from 20 ms to 1000 ms.
Rate – This knob sets the speed of the modulation.
The range will vary depending on the effect chosen.
Depth – This knob sets the depth of the delay
modulation. The range will vary depending on
the effect chosen.
Decay – This knob represents the decay time
of the reverb, ranging from 0 to 60.
Size – This knob represents the amount of desired
reverb (or "the size of the room"), ranging from 0
(no reverb) to 15 (max reverb).
28
Onyx Premium Analog Mixer with Multi-Track USB
High Value Default Increments
100 10 ±1
150 62 ±1
100 100 ±1
16.0 kHz 7.6 kHz Variable
3.0 2.0 ±0.1
+8 dB -1 dB ±1 dB
18.0 kHz 18.0 kHz ±0.1-0.2 kHz
600 Hz 90 Hz ±1-10 Hz
FX
RATE DEPTH
50 39
PRESETS
Delay + Reverb Parameters and Values
Parameter Low Value High Value
Time 20 ms 1000 ms
Rate 16
Depth 0
EQ
Frequency 400 Hz 16.0 kHz
Width (Q) 0.5
Gain -8 dB +8 dB
LPF 6.0 kHz 18.0 kHz
HPF 80 Hz 600 Hz
Delay + Chorus Parameters and Values
Parameter Low Value High Value
Time 20 ms 1000 ms
Rate 0
Depth 16
EQ
Frequency 400 Hz 16.0 kHz
Width (Q) 0.5
Gain -8 dB +8 dB
LPF 6.0 kHz 18.0 kHz
HPF 80 Hz 600 Hz
Reverb + Chorus Parameters and Values
Parameter Low Value High Value
Decay 0
Size 0
Rate 0
EQ
Frequency 400 Hz 16.0 kHz
Width (Q) 0.5
Gain -8 dB +8 dB
LPF 6.0 kHz 18.0 kHz
HPF 80 Hz 600 Hz
The rate (Hz) and depth (ms) determine
how many cycles per second the chosen
effect oscillates. However, the rate and depth
of the two chorus modulation effects is expressed
as 0.1x Hz / ms which translates the value that
the processor utilizes. An easy way to understand
the value is to take the number below the virtual knob
and "move" the decimal one point to the left (or multiply
by 0.1). For example, if rate is displayed as 37, then
it's really 3.7 Hz.
Default Increments
196 ms ±9-10 ms
73 26 ±1
100 8 ±1
6.8 kHz Variable
3.0 2.1 ±0.1
+2 dB ±1 dB
12.6 kHz ±0.1-0.2 kHz
88 Hz ±1-10 Hz
Default Increments
196 ms ±9-10 ms
100 12 ±1
63 40 ±1
1.0 kHz Variable
3.0 2.0 ±0.1
±0 dB ±1 dB
6.0 kHz ±0.1-0.2 kHz
80 Hz ±1-10 Hz
Default Increments
60 10 ±1
15 6 ±1
54 33 ±1
415 Hz Variable
3.0 2.0 ±0.1
-5 dB ±1 dB
10.0 kHz ±0.1-0.2 kHz
108 Hz ±1-10 Hz