Create Directory Entries; Create A New Directory Entry - AT&T BL102 Complete User's Manual

Directory

Create directory entries

Create a new directory entry

1. Press MENU/
2. Press q or p
CID
/SELECT.
MENU
3. Press /SELECT to choose Add new entry.
MENU
4. Use the dialing keys to enter a telephone number (up to
30 digits) when prompted.
Press q
CID
f
or right.
Press
MUTE/
f
Press and hold
f
Press and hold
f
dialing pause (a P appears).
-OR-
Copy a number from the redial list by pressing
REDIAL/
PAUSE
to locate the number. Press
/SELECT to move on to the name.
5. Press
MENU
The display shows Number repeated if the number
is already in the directory. You cannot save the same
number twice.
6. Use the dialing keys to enter a name (up to 15 characters)
when prompted. Each time you press a key, the character
on that key appears. Additional key presses produce other
characters on that key. See the chart on the next page.
Press q
CID
f
or right.
Press 0 to add a space.
f
Press
MUTE/
f
Press and hold
f
Press TONE
f
/SELECT to store your new directory entry. There is a
7. Press
MENU
confirmation tone and the screen shows Saved. To change the entry later,
see page 35.
NOTE: The first letter of every word is a capital letter. The remaining letters in a word start as lower case
letters, as shown in the chart on the next page.
in idle mode to enter the main menu.
SELECT
to scroll to Directory, then press
DIR
or p to move the cursor to the left
DIR
DELETE to erase a digit.
DELETE to erase all digits.
MUTE/
/PAUSE to enter a 3-second
REDIAL
, then q or p
CID
MENU
or p to move the cursor to the left
DIR
DELETE to erase a character.
DELETE to erase all characters.
MUTE/
to change the next letter to upper or lower case.
, or pressing REDIAL/
DIR
/SELECT to copy the number.
32
Directory
ECO
Add new entry
ECO
Enter number
888-883-2445
ECO
repeatedly
PAUSE
Enter name
Robert Brown
ECO
Enter name
Charlie Johnson
ECO