Advertisement
Quick Links
860610260
Issue 2, April 2016
www.commscope.com
SYSTIMAX
General
®
The SYSTIMAX
imVision
modules to communicate with an imVision
®
iPatch
panels, with the ability to feed additional power to the imVision controller. A ribbonized cable is used
to connect the imPower to the panel bus to enable twice as many 96-fiber LC or MPO modules to
communicate with the imVision controller.
Ordering Information is listed below:
Material ID
Part No.
760219345
imV-imP
760224832
imV-imP-AR
How to Contact Us
To find out more about CommScope
For technical assistance:
-
Within the United States, contact your local account representative or technical support at 1-800-344-0223.
Outside the United States, contact your local account representative or PartnerPRO
-
Within the United States, report any missing/damaged parts or any other issues to CommScope Customer Claims
at 1-866-539-2795 or email to claims@commscope.com. Outside the United States, contact your local account
representative or PartnerPRO Network Partner.
For RoHS Inquiries:
CommScope Inc.
Corke Abbey, Bray
Co. Dublin, Ireland
Attn: Legal Department
®
®
imVision
imPower
Installation
®
imPower™ power extender can accommodate additional 96-fiber LC or MPO
®
controller. The imVision imPower supports redundant power for
imVision imPower power extender
imVision imPower power extender (Argentina version)
™
imPower
Power Extender with imVision
®
products, visit us on the web at
© 2016 CommScope, Inc.
All rights reserved
™
Power Extender
Description
®
Controller
http://www.commscope.com/
™
This product is covered by one or more U.S.
patents or their foreign equivalents. For patents, see
www.commscope.com/ProductPatent/ProductPatent.aspx
®
Network Partner.
Page 1 of 5
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for CommScope SYSTIMAX imVision imPower
Summary of Contents for CommScope SYSTIMAX imVision imPower
- Page 1 Outside the United States, contact your local account representative or PartnerPRO Network Partner. Within the United States, report any missing/damaged parts or any other issues to CommScope Customer Claims at 1-866-539-2795 or email to claims@commscope.com. Outside the United States, contact your local account representative or PartnerPRO Network Partner.
-
Page 2: Specifications
This product should be operated using only the power supply provided by CommScope with the product. Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on over current protection and supply wiring. - Page 3 860610260 Instruction Sheet Installation of the equipment in a rack should be such that the amount of airflow required for safe operation of the equipment is not compromised. To be installed in restricted access areas only. Note: All wiring that connects to the imVision or imPower equipment must meet applicable local and national building codes and network wiring standards for communication cable.
- Page 4 860610260 www.commscope.com Instruction Sheet imPower Slot on imPower used for alternate mounting Alternate Mounting Method 4. An alternate method for mounting involves sliding the imPower onto the farthest left cable management bar for the imVision controller as shown. Step 3 – Connect Ribbonized Jumper Cables to Controller and Panel Bus Note: imPower connections will replace existing data and power connections for installed imVision controllers.
- Page 5 Extended Step 5 – Power Up Controller 1. Please go to the CommScope eCatalog to download the SYSTIMAX imVision Controller Installation Guide (860526839). 2. Power up imPower and imVision controller and configure settings and panels as described in the installation guide.
Need help?
Do you have a question about the SYSTIMAX imVision imPower and is the answer not in the manual?
Questions and answers