Kohler C3-230 Quick Start Manual page 2

Required Electrical Service
Dedicated circuit required, protected with Class A Ground-Fault
Circuit-Interruptor (GFCI) or Residual Current Device (RCD).
120 V, 60 Hz, 1100 W
Technical Information
All measurements are nominal.
Seat shape type: Elongated
Seat front type: Closed front
Seat hinge type: Quiet-Close
Seat hole centers: 5-1/2" (139 mm)
Power cord length: 46" (1168 mm)
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
10-28-2014 02:22
Toilet Seat with Bidet Functionality
32" (813 mm) R.
Installation Notes
Install this product according to the installation
guide.
Connect the seat to a cold water supply of
drinking quality water at a pressure of 20 psi - 80
psi (139 kPa - 551 kPa).
Locate a grounded, dedicated electrical outlet
within 12" (305 mm) of the toilet.
Do not install this seat in a location where: (1)
water might be splashed on the product or (2)
excessive moisture, high humidity levels, or
condensation is present. This will avoid damage
to the electronic components.
Do not use an extension cord with this product.
To avoid possible product malfunction, do not
plug in the seat until instructed to do so.
C3 -230
K-4108