VRS18W Updated UG 06.07.14_V1.0 04/07/2014 15:30 Page 6
vax.co.uk
5. Preparing the Machine
Hold the handle of the clean water tank and press 'PULL
TO RELEASE' . Tilt Clean Water Tank away from the carpet
washer and remove (Fig 5/1).
Fig.5/1
Unscrew the measuring cap from the reverse side of the
clean water tank. Fill measuring cap with solution (Use
only 1 capful of solution per full tank). Pour into clean
water tank (Fig 5/2).
Fig.5/2
Fill remainder of clean water tank with warm (max 40°C)
tap water. Replace cap (Fig 5/3).
Fig.5/3
6
preparing the machine
Place bottom of clean water tank into carpet washer and
push back until it locks into place (Fig 5/4).
Fig.5/4