•
Remove the spark plug cover and insert a suitable wrench for spark plugs
with the appropriate leverage for the removal.
03_12
•
Remove the spark plug.
•
When refitting, place the spark plug into the hole at the required angle and
finger tighten it as far as it will go. Use the wrench only to tighten it.
•
Cover the spark plug completely with its cap, making sure it is back in the
retainer.
N.B.
USING SPARK PLUGS OTHER THAN THE INDICATED TYPE OR SHIELD-LESS
SPARK PLUG CAPS CAN CAUSE ELECTRICAL SYSTEM FAILURES.
WARNING
SPARK PLUG MUST BE REMOVED WHEN THE ENGINE IS COLD. REPLACE
THE SPARK PLUG AS INDICATED IN THE SCHEDULED MAINTENANCE TABLE.
THE USE OF ELECTRONIC CENTRAL UNITS AND OF NON-COMPLIANT ELEC-
TRONIC IGNITIONS OR SPARK PLUGS OTHER THAN THOSE PRESCRIBED
MAY SERIOUSLY DAMAGE THE ENGINE.
77