PIAGGIO MP3 300 hpe 2020 Manual page 41

key to «OFF» again and pull it out. In this way you can program up to 3 keys, by
repeating the above operation and respecting the indicated times.
FINAL PHASE
After removing the key «B» to be programmed, insert the MASTER key «A» again
and turn it to the «ON» position. (Do this within ten seconds of removing the previous
key). Leave it in this position for 1 to 3 seconds and return it to «OFF».
CORRECT PROGRAMMING CHECK PHASE
Insert the «MASTER» key «A», deactivating the transponder «C» (that is to say by
tipping the key cap by 90°) and turn the key to «ON». Perform the engine starter
operation. Ensure that the engine does not start. Insert the programmed key «B» and
repeat the starter operation. Check that motor starts.
WARNING
01_44
SHOULD YOU START THE ENGINE WITH THE MASTER KEY (WITH TRANS-
PONDER OFF) OR IN THE EVENT OF WRONG OPERATION DURING PROGRAM-
MING, REPEAT THE PROCEDURE FROM THE BEGINNING.
41