WARNING
THE ASR SYSTEM IS BASED ON THE RECOGNITION OF SPEED DIFFERENCES
BETWEEN FRONT AND REAR WHEEL. IN ORDER FOR THE SYSTEM TO MAIN-
TAIN MAXIMUM EFFICIENCY IN ALL CONDITIONS, THE CALIBRATION PRO-
CEDURE MUST BE PERFORMED EVERY TIME, EVEN IN CASE OF REPLACE-
MENT OF JUST ONE TIRE.
FOR THE CALIBRATION OF THE CONTROL UNIT PERFORM THE PROCEDURE
BELOW.
•
SWITCH "1": activation / deactivation.
•
WARNING LIGHT "2":operating indication warning light.
ASR INDICATOR LIGHT FLASHING MODE
The ASR indicator light can be off, on steady or flashing with 3 different frequencies.
ASR indicator off
Condition: vehicle in motion
•
When the vehicle is running, the ASR indicator light off indicates that the
system is operational but not active (normal condition of use).
01_40
ASR indicator light steady on
Condition: key "ON", engine running and ASR system voluntarily deactivated by the
user
•
If the deactivation was voluntary (by pressing the ASR button "1" for 1 second
with the engine running) it is recommended to reactivate the ASR system as
soon as possible, to guarantee the maximum safety of the vehicle. Deacti-
vation may be necessary only in case of starting with very low grip surfaces
(mud, snow) on which the operation of the ASR could actually prevent the
movement of the vehicle.
01_41
33
Need help?
Do you have a question about the MP3 300 hpe 2020 and is the answer not in the manual?