RESIDUAL AUTONOMY
The residual autonomy, indicated in «km» or «mi» based on the display settings, is a
calculated and estimated value.
The residual autonomy is estimated based on the average travel of the last three
minutes, therefore a better estimation of the autonomy is obtained, when driving at
constant speed.
01_14
From the ignition of the reserve warning light, the indicated residual autonomy value
will be «---». Perform the refuelling as soon as possible.
SETTING THE UNITS OF MEASUREMENT
Press and hold down for at least 3 seconds the "MODE" button and at the same time
turn the starter key to "ON".
The icons "kmi" and "°C-°F" will begin to flash.
"Kmi" represents the combination of "km" (kilometers) and "mi" (miles).
By pressing the "MODE" button for less than a second the icons "km" e "mi" are
selected in sequence.
Press and hold down for at least 3 seconds the SET" button to confirm your choice.
Now the icon indicating the outside temperature "°C-°F" will flash.
By pressing the "MODE" button for less than a second the icons " °C" and " °F" are
selected in sequence.
Press and hold down for at least 3 seconds the SET" button to confirm your choice.
19
Need help?
Do you have a question about the MP3 300 hpe 2020 and is the answer not in the manual?